Superabsorbent polymers (SAPs) efficiently reduce total shrinkage and cracking susceptibility of fibre reinforced mortars (FRM). This paper discusses the effects SAPs on microstructure mechanical properties FRM containing fly ash (FA) ground granulated blast-furnace slag (GGBS) during a period 180 days. Three types cement including CEM I, II/B-V III/A three SAP with different chemical compositi...

Nanoporous lithium doping magnesium silicate (nl-MS) was introduced into calcium sulfate hemihydrate to prepare calcium sulfate composite (nl-MSC) bone cements. The introduction of nl-MS improved the in vitro degradability of nl-MSC cements, which could neutralize acidic degradable products of calcium sulfate and prevented the pH from dropping. The cements were implanted into the bone defects o...

The use of self-adhesive resin cements is accomplished by a simple clinical step, in which the simultaneous demineralization/infiltration of the bonding substrate takes place. However, the self-adhesive resin cements have lower bond strength than conventional resin cements that rely on the application of etch-and-rinse adhesive systems. In order to increase the bond strength of the self-adhesiv...

In this study, the release of gentamicin as a function of time was measured for six different gentamicin-loaded bone cements and related with the surface roughness, porosity and wettability of the cements. Initial release rates varied little between the six bone cements (CMW1, CMW3, CMW Endurance, CMW 2000, Palacos, and Palamed) and ranged from 8.6 to 14.1 microg/cm2/h. The total amounts of gen...

The development of dental materials with improved properties and increased longevity can save costs and minimize discomfort for patients. Due to their good biocompatibility, glass ionomer cements are an interesting restorative option. However, these cements have limited mechanical strength to survive in the challenging oral environment. Therefore, a better understanding of the structure and hyd...

The purpose of this paper was to compare the bond strengths of the self-adhesive luting cements between ceramics and resin cores and examine their relation to the cement thickness. Three self-adhesive luting cements (Smartcem, Maxcem, and G-CEM) and a resin cement (Panavia F 2.0) for control were used in the paper. The thickness of the cements was controlled in approximately 25, 50, 100, or 200...

PURPOSE To evaluate porosity volume and localization in luting cements under fixed dental prostheses after cementation using micro-computed tomography (CT). MATERIALS AND METHODS Seventy-seven sound molars were circumferentially prepared to receive all-ceramic crowns, and IPS e.max ceramic copings were fabricated according to the manufacturer's instructions. For this study, different dental l...