High-speed video and infrared thermometry were used to obtain timeand space-resolved information on bubble nucleation and heat transfer in pool boiling of water. The bubble departure diameter and frequency, growth and wait times, and nucleation site density were directly measured for a thin, electrically-heated, indium-tin-oxide surface, laid on a sapphire substrate. These data are very valuabl...

In the case of multi-component condensation the ‘condensing vapour contains a mixture of components having different boiling points, which condense over a wide temperature range, either in presence of or absence of non-condensing material. In this work, a design algorithm for the condensation of a multi-component vapour mixture in shell side of a shell and tube vertical condenser has been devel...

Pool boiling experiments were conducted with three horizontal, flat, silicon surfaces, two of which were coated with vertically aligned multiwalled carbon nanotubes (MWCNTs). The two wafers were coated with MWCNT of two different thicknesses: 9 m (Type-A) and 25 m (Type-B). Experiments were conducted for the nucleate boiling and film boiling regimes for saturated and subcooled conditions with l...

in order to examine the laminar convective heat transfer of nanofluid, experiments carried out using silver-oil nanofluid in a concentric annulus with outer constant heat flux as boundary condition. silver-oil nanofluid prepared by electrical explosion of wire technique and observed no nanoparticles agglomeration during nanofluid preparation process and carried out experiments. the average size...

This second part of a two-part study examines the prediction of saturated flow boiling heat transfer in mini/micro-channels. The first part culminated in a technique for determining the dryout incipience quality corresponding to substantial deterioration in the heat transfer coefficient. In this part, a consolidated database for flow boiling in mini/micro-channels is amassed from 31 sources, of...

Surface wettability is recognized as playing an important role in pool boiling and the corresponding heat transfer curve. In this work, a systematic study of pool boiling heat transfer on smooth surfaces of varying wettability (contact angle range of 5° - 180°) has been conducted and reported. Based on numerical simulations, boiling curves are calculated and boiling dynamics in each regime are ...

This paper presents the heat transfer coefficients measured during HC-290 (Propane) vaporisation inside a brazed plate heat exchanger: the effects of heat flux, saturation temperature (pressure) and outlet conditions are investigated. The heat transfer coefficients show weak sensitivity to saturation temperature (pressure) and great sensitivity to heat flux and outlet conditions. The saturated ...

Reliance on multiphase fluid-dynamics models, which are developed with relatively limited experimental data, requires a quantitative assessment of the solution variability due to the approximations. In this paper, uncertainty in the Eulerian multiphase boiling model in the Nphase-CMFD code is assessed in the context of the DEBORA test case and the CRUD problem. The models under consideration ar...

Experiments have been performed to assess the feasibility of cooling microelectronic components by means of single-phase and two-phase forced convection. Tests were conducted using a single heat source flush mounted to one wall of a vertical rectangular channel. An inert fluorocarbon liquid (FC-72) was circulated upward through the channel at velocities up to 4.1 m/s and with subcooling up to 4...

Characterization of local boiling trends, in addition to the typically reported area-averaged trends, is essential for the robust design and implementation of phase change technologies to sensitive heat transfer applications such as electronics cooling. This paper compares local and area-averaged boiling curves during a phase change process using non-intrusive quantitative infrared thermal visu...