An effective heat dissipation of uncooled 400-Gbps (16×25-Gbps) form-factor pluggable (CDFP) optical transceiver module employing chip-on-board multimode 25-Gbps vertical-surface-emitting-laser (VCSEL) and 25-Gbps photodiode (PD) arrays mounted on a brass metal core embedded within a printed circuit board (PCB) is proposed and demonstrated. This new scheme of the hollow PCB filling with thermal...

The dezincification of brasses has been the subject of substantial conjecture and investigation over the past century and the technical press is littered with papers on the problem. Very broadly the technical literature can be subdivided into five main groups as follows: (a) Observations of dezincification phenomena including mechanically induced dezincification and in-service experience in var...

Abstract The paper details a comprehensive experimental investigation on the influence of operating parameters and cut direction (parallel perpendicular to fibre orientation) when wire electrical discharge machining (WEDM) unidirectional CFRP composites using zinc-coated brass (0.25-mm diameter). A Taguchi L18 fractional factorial orthogonal array considering four variable including open voltag...

at the final stages of a coronary artery bypass graft operation on a 64-year-old man, an experienced physician attempted to insert an intra-aortic balloon pump into the femoral artery via the seldinger technique. however, while the balloon pump was being passed over the guide wire, the latter was completely lost. the guide wire should be held at the tip at all times to prevent passage into the ...

the effects of steel wire patenting process parameters on very fine interlamellar spacing in the pearlitic steel wire were investigated and the optimized condition of the process was achieved. in this work, the initial nanopearlitic structure was obtained in a 0.72 wt% carbon steel wire before the wire drawing process. the results were the minimum interlamellar spacing of 35 nm and maximum ulti...

The evolution of microstructure and texture during isochronal annealing of a heavily cold rolled Al–0.3% Cu alloy has been characterized using electron backscatter diffraction. It is found that the rolling texture of this alloy is dominated by the Brass component and that recrystallization during annealing leads to the formation of a pronounced Goss texture. It is suggested that the development...

Electric discharge machining (EDM) is a ‘newer technology utilized to machine hard metals, alloys, composites and ceramics. This paper reports the experimental investigation carried out on EDM to study the effects of machining parameters such as pulsed current on material removal rate, depth of cut, overcut, tool wear (net weight lost) and hardness on En-31 tool steel The work material was elec...