Magnetoacoustic emission (MAE) is a phenomenon where acoustic noise is generated due to the motion of non-180 ° magnetic domain walls in a ferromagnet with non-zero magnetostrictive constants. MAE has been studied extensively for many years [1-5] and has even been applied as an NDE tool for characterizing the heat treatment of high-yield low carbon steels [6-8]. A complete theory which fully ac...

A series of medium-carbon low alloy steels was quenched to martensite and tempered at 150 C. This low-temperature-tempered (LTT) martensite was subjected to uniaxial tensile and impact testing. Yield and ultimate tensile strength and uniform elongation increased, and post uniform and total elongation and fracture toughness decreased, with increasing carbon concentration. The carbon dependence o...

The mechanism of the bainite transformation in carbon containing steels was discussed after presenting our recent experimental results; (1) the bainite transformation has its own C-curve, (2) incomplete phenomenon is a general feature of the bainite transformation, (3) bainitic fenite grows to a limited size, and (4) bainitic ferrite is highly supersaturated with respect to carbon. It was exami...

the static strain aging is a phenomenon that can change the mechanical properties of low carbon steels. thus, the static strain aging behavior of low carbon steel wires after drawing process is studied. to do so, the wires are austenitized at different temperatures and cooled in different rates. then the wires are drawn and aged at a specific temperature and time. before and after aging of each...

Pulsed electrodeposition of polyaniline (PANI) allows the fabrication of flexible, electrically conductive, nonwoven PANI-carbon nanotube (PANI-CNT) composite fabrics. They possess specific tensile strength and a modulus of toughness higher than that of aluminum matrix composites, titanium and aluminum alloys, steels, and many other structural materials. Electrochemical tests show that these na...

with careful design, mixed microstructures consisting of fine plates of upper bainitic ferrite separated by thinfilms of stable retained austenite have exhibited impressive combinations of strength and toughness in highsiliconbainitic steels. the silicon suppresses the precipitation of brittle cementite leading to an improvement intoughness. the essential principles governing the optimisation o...

The present research was designed to evaluate an ultrasonic technique for measuring the drawability of low carbon steel sheets nondestructively. This technique, which uses electro magnetic acoustic transducers (EMAT's) is embodied in a fully automatic ultrasonic device called Ultra-Form, which was developed at Iowa State University (by the Center For Nondestructive Evaluation) in 1990. EMAT tra...

Austenitic carbon steels that exhibit excellent mechanical properties due to the twinning-induced plasticity effect have been studied extensively. On the other hand, austenitic stainless steels usually achieve good strength and ductility via transformation-induced plasticity. However, relying on martensite transformation for strength may cause problems such as delayed cracking. Therefore, the t...

This Study about output parameter of Non Traditional machining, i.e., Which are not used conventionally like Electrical Discharge Machining (EDM) is a machining method primarily used for hard metals or those that would be very difficult to machine with traditional techniques, here it is used for cryogenically treated work piece. In simple terms, EDM is a manufacturing process whereby a desired ...