The absorption of a metallic cathode in OLEDs is analyzed by using FDTD calculation. As the light propagates parallel to the layer, the intensity of E(z) polarization decreases rapidly. The intensity at 2.0 microm from the dipole is less than a quarter of that at 0.5 microm. The strong absorption by a cathode can be a critical factor when considering the increase of optical extraction by means ...

We performed a systematic investigation on the dynamic behavior of conduction filaments (CFs) in WO₃-x-based devices. It was found that the electric forming produced an electric structure consisted of a conductive channel (virtual cathode) started from cathode and an insulating band surrounding anode. Both the virtual cathode and the insulating region varied with repeated resistance switching. ...

In this study, a whole-cell 3D multiphase non-isothermal model is developed for hydrogen alkaline anion exchange membrane (AAEM) fuel cell, and the interfacial effect on the two-phase transport in porous electrode is also considered in the model. The results show that the insertion of anode MPL, slight anode pressurization and reduction of membrane thickness generally improve the cell performan...

La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) powders with different particle sizes, synthesized through a citrate complexation method and a gel-casting technique, are used to fabricate porous LSCF cathodes with graded microstructures via tape casting. To create porous electrodes with desired porosity and pore structures, graphite and starch are used as pore former for different layers of the graded cathode....

Very bright and efficient top-emitting organic light-emitting diodes (TOLEDs) using an ultra-thin ytterbium (Yb) layer capped with a semitransparent Ag layer as the effective electron-injection cathode were demonstrated. TOLED with Yb/Ag cathode exhibited lower operation voltage and higher power efficiency, as compared to the one with commonly used Ca/Ag cathode. With bis(2-phenylpyridine)iridi...

Metal cathodes installed in rf guns typically exhibit much lower quantum efficiency than the theoretical limit. Experimenters often use some sort of in situ technique to “clean” the cathode to improve the QE. The most common technique is laser cleaning where the laser is focused to a small spot and scanned across the cathode surface. However, since the laser is operated near the damage threshol...

A model for negative glow metal-vapor ion lasers that self-consistently describes the dynamics of the negative glow and the cathode sheath regions of the discharge has been developed. The model computes the electron energy distribution and the population of relevant excited states in the negative glow self-consistently with the charged particle fluxes and electric field distribution in the cath...

The thermally assisted photoemission (TAPE) effect was investigated for the hexaboride thermionic cathodes (LaB6 and CeB6). It was found that the quantum efficiency of these cathodes can be increased by raising the cathode temperature along with the thermionic emission. In addition both materials can emit a measurable photoemission current by being irradiated with a laser having a photon energy...

We report Co-free, Li-rich Li1+x Ni0.5 Mn1.5 O4 (0<x<1) compounds as high-voltage and high-capacity cathode materials for Li-ion cells. Their tailored morphology allows high density and facile processability for electrode development. In the potential range 2.4-4.9 V, the cathode material of composition Li1.5 Ni0.5 Mn1.5 O4 shows excellent performance in terms of capacity and cycling stability ...

Rechargeable aqueous Zn/MnO2 battery chemistry in a neutral or mildly acidic electrolyte has attracted extensive attention recently because all the components (anode, cathode, and electrolyte) in a Zn/MnO2 battery are safe, abundant, and sustainable. However, the reaction mechanism of the MnO2 cathode remains a topic of discussion. Herein, we design a highly reversible aqueous Zn/MnO2 battery w...