The coal utilization in thermal power plants in Malaysia has increased significantly which produces an enormous amount of coal combustion by-product (CCBP) or coal ash and poses severe disposal problem. As each coal ash is distinct, this study presents the geochemistry of the coal ash, in particular fly ash, produced from the combustion of local coal from Kuching Sarawak, Malaysia. The geochemi...

Emission samples were obtained from two medium-sized power plants, one fired with oil and the other with pulverized coal. Particles obtained by a miniscale plume stack gas sampler (MIPSGAS), simulating the dilution process in the plume, were subjected to detailed physical, chemical and biological characterization. Studies by scanning electron microscopy and by Coulter counter demonstrated that ...

All the headings should be uppercase, bold Arial size 10 font. In order to comprehensively understand the serious disaster of underground mineral self-ignition and source loss in practice, dynamical and thermo-chemical phenomena of coal spontaneous combustion were investigated. A coupled conductive, convective and radiative heat transfer model for inclined outcrop seam in porous coal-bearing st...

The combustion of coal in power plants generates solids (e-g., fly ash, bottom ash) and flue gas (e.g., SOX, C02). New Clean Air Act mandated reduction of SOX emissions from coal burning power plants. As a result, a variety of Clean Coal Technologies (CCT) are implemented to comply with these amendments. However, most of the CCT processes transfer environmentally sensitive elements (e.g., As, C...

The influence of fluidized bed combustion (FBC) temperature and coal rank on polycyclic aromatic hydrocarbon (PAH) emissions was assessed. A low-rank coal and a high-rank coal were burnt in a fluidized bed reactor (FBR) on a laboratory scale. An outlet gas sample was passed through a capture system provided with three traps: nylon titer, Teflon filter and XAD-2 resin. The PAH captured were anal...

Industries using conventional fossil fuels have an interest in better understanding the mechanism of particulate formation during combustion since such is responsible for emission of undesired inorganic elements that directly impact the atmospheric pollution level. Fine and ultrafine particulates have tendency to escape the flue gas cleaning devices to the atmosphere. They also preferentially c...

The results of a theoretical study of the formation and growth of the submicron flyash aerosol around a single burning coal particle are presented. The vaporization of ash and subsequent aerosol formation near the coal particle are studied because the local combustion environment influences these proewes strongly. A mathematical model is developed that describes the transport of ash vapor and a...

Recently, the worldwide supply of rare earth element (REE) resources will be severely restricted. On the other hand, coal fly ash particles emitted from coal-fired electric power plants contain relatively high concentrations of REEs. The contents of REEs in coal fly ash are regularly several hundreds of ppmw. In order to extract and recover REEs from coal fly ash particles, as a first step, we ...

Fly ashes and gypsum are one of the main wastes produced in coal-fired power stations which may be sent to landfills for their disposal. In this work, leaching and speciation of mercury in fly ashes and gypsum from a modern co-combustion power plant equipped with a selective catalytic reduction (SCR) unit in the Netherlands were studied. The mercury leachable contents were checked against diffe...

Practical simulation of industrial-scale coal combustion relies on the ability to accurately capture the dynamics of coal subprocesses while also ensuring the computational cost remains reasonable. The majority of the residence time occurs post-devolatilization, so it is of great importance that a balance between the computational efficiency and accuracy of char combustion models is carefully c...