The purpose of this study was to investigate the shear bond strength of metal discs luted to dentine using Resin Coating Technique. In this study the adhesives used were dentine bonding agents, namely, Clearfil SE Bond and Syntac Sprint which were applied one week prior to cementation of Cobalt Chromium (Co-Cr) alloy discs to determine if there was any increase in the bond strengths when later ...

A novel approach for depositing hydroxyapatite (HA) films on titanium substrates by using mechanical alloying (MA) technique has been developed. However, it was shown that one-hour heat treatment at 800°C of such mechanically coated HA layer leads to partial transformation of desired HA phase to beta-tri-calcium phosphate (β-TCP) phase. It appears that the grain boundary and interface defects f...

Original scientific paper In this paper, influence of flame spraying and fusing on microstructure of substrates made from heat treated carbon steel C45, a heat treated low alloyed 42CrMo4 steel and stainless austenitic steel X6CrNiMo18-10-2, has been investigated. Flame spraying and fusing is a deposition technique commonly applied to nickel-base self-fluxing alloys (NiCrBSi alloys). Because of...

In this study nanosized TiO2coatings on the 316L stainless steel substrate were prepared by means of dip-coating technique in which thickness of the coating layer increased byrepeating the coating cycles in two different routes: (I) dipping and drying,respectively, were repeated one, three and five times and finally the dried coated sample was heat treated (single); (II) multiple heat treatment...

The advancement of transmission electron microscopy has made it possible to analyze the metallographic structure of steel products on a nanoscopic scale, which leads to the detail understanding of microstructures such as fine precipitates and grain boundaries. The application of the characteristic technology to commercial steel products requires consistency in the structural analysis of steel f...

OBJECTIVE To investigate osteogenesis of bone marrow mesenchymal stem cells (BMSCs) on strontium-substituted nano-hydroxyapatite (Sr-HA) coated roughened titanium surfaces. METHODS Sr-HA coating and HA coating were fabricated on roughened titanium surfaces by electrochemical deposition technique and characterized by field emission scanning electron microscope (FESM). BMSCs were cultured on Sr...

Substrate scratches can limit the laser resistance of multilayer mirror coatings on high-peak-power laser systems. To date, the mechanism by which substrate surface defects affect the performance of coating layers under high power laser irradiation is not well defined. In this study, we combine experimental approaches with theoretical simulations to delineate the correlation between laser damag...

A new nondestructive technique, confocal scanning laser microscopy (CSLM), is described which is used to characterize the topography and morphology of polymer coatings. The topography of the coating can be determined even when the coating is completely opaque. When the coating is not completely opaque, CSLM has the distinct advantage of also being able to distinguish between the coating surface...

Long-term use of indwelling medical catheters has often been hindered by catheter-associated nosocomial infections. In this study the effectiveness of silver coating of polystyrene and polyethylene polymers was investigated. Polymer pieces of 2 cm2 each were coated with a thin layer of silver using electroless plating technique. Silver-coated polymers were challenged with cultures of four diffe...