OBJECTIVES Recently, it was shown that NanoMTA improved the setting time and promoted a better hydration process which prevents washout and the dislodgment of this novel biomaterial in comparison with WTMA. This study analyzed the compressive strength of ProRoot WMTA (Dentsply), a NanoWMTA (Kamal Asgar Research Center), and Bioaggregate (Innovative Bioceramix) after its exposure to a range of e...

We assessed the mechanical properties of PC-12 neurites by applying a force with calibrated glass needles and measured resulting changes in neurite length and deflection of the needle. We observed a linear relationship between force and length change that was not affected by multiple distensions and were thus able to determine neurite spring constants and initial, nondistended, rest tensions. 8...

deep rolling is a kind of mechanical surface treatments that can improve surface quality, dimensional accuracy and mechanical properties of the parts. compressive residual stresses generated by the process reduce the tensile stresses during loading into the workpiece. the distribution of residual stress induced by deep rolling can be influenced by rolling parameters; such as overlap of the roll...

PURPOSE The design of the attachment must provide an optimum stress distribution around the implant. In this study, for implant overdentures with a bar/clip attachment or a locator attachment, the stress transmitted to the implant in accordance with the change in the denture base length and the vertical pressure was measured and analyzed. MATERIALS AND METHODS Test model was created with epox...

This is the first study to quantify the measurement error due to the physical thickness of Fujifilm for several material combinations relevant to orthopaedics. Theoretical and experimental analyses were conducted for cylinder-on-flat indentation over a series of forces (750 and 3000 N), cylinder diameters (0 to 80 mm), and material combinations (metal-on-metal, MOM; metal-on-polymer, MOP; metal...

Suction based attachment systems for pick and place handling of fragile objects like glass plates or optical lenses are energy-consuming and noisy and fail at reduced air pressure, which is essential, e.g., in chemical and physical vapor deposition processes. Recently, an alternative approach toward reversible adhesion of sensitive objects based on bioinspired dry adhesive structures has emerge...

The purpose of this study is to describe an MRI-based EMG-driven knee model to quantify tibiofemoral compressive and shear forces. Twelve healthy females participated. Subjects underwent 2 phases of data collection: (1) MRI assessment of the lower extremity to quantify muscle volumes and patella tendon orientation and (2) biomechanical evaluation of a drop-jump task. A subject-specific EMG-driv...

Pushing and pulling during manual material handling can increase the compressive forces on the lumbar disc region while creating high shear forces at the shoe-floor interface. A sagittal plane dynamic model derived from previous biomechanical models was developed to predict L5/S1 compressive force and required coefficients of friction during dynamic cart pushing and pulling. Before these predic...

The aim of this study was to investigate the stress distribution in a 3-D model of two-rooted tooth (first maxillary premolar) under two different occlusal force vectors by using finite element analysis. In the first model overall force of 200 N was divided into three vectors (cusp to fossa occlusion), and in the second model overall force was divided into 4 vectors (cusp to fossa and cusp to m...