The weakest specimens showed maximum compressive strengths ranging from 115 kN/m to 135 kN/m. The lowest load deformation response was observed for the Gf 9 specimen group, at 0.7 kN/mm. The strongest and stiffest results were observed for the 3-bag soil-filled specimen, with load deformation responses ranging from 8 kN/mm to 15 kN/mm, and compressive strength ranging from 1100 kN/m to 1300 kN/...

Sweden’s concrete waste is recycled for use in low-utility purposes such as in the construction of sub-bases in roads but hardly as aggregates in new concrete. To analyse the potential for high-utility recycling, a literature study was conducted on the regulatory instruments, building standards, production and properties of recycled concrete aggregates and the recycled aggregate concrete for Sw...

Flowable fill is a self-leveling and self-compacting material that is rapidly gaining acceptance and application in construction, particularly in transportation and utility earthworks. When mixed with concrete sand, standard flowable fill produces a mass density ranging from 1.8 to 2.3 g/cm(3) (115-145 pcf). Scrap tires can be granulated to produce crumb rubber, which has a granular texture and...

The replacement of natural aggregates by recycled aggregates in the concrete manufacturing has been spreading worldwide as a recycling method to counteract the large amount of construction and demolition waste. Although legislation in this field is still not well developed, many investigations demonstrate the possibilities of success of this trend given that concrete with satisfactory mechanica...

abstract introduction. recently, the ariadent zinc phosphate cement has been introduced to market with low cost. some dentists purchase this product because of low cost and others avoid buying it because of unreliable quality. the two important properties of ideal dental cement are to have the minimum film thickness (less than 25 micron) and to have favorable compressive strength. the purpose o...

The compressive strength of five different amalgams was measured at one hour, six hours, 24 hours, and seven days, and X-ray diffraction analysis was carried out for each amalgam at the same times in order to investigate the early strength characteristics of the amalgams in relation to the formation of different phases. At 24 hours all tested amalgams reached about 90% or more of their seven-da...

INTRODUCTION One of the biggest disadvantages of dental amalgam is that gaining its ultimate strength is a slow process. The use of a rapid-setting amalgam with high early compressive strength could be a better option in preventing early fractures in pediatric dentistry. The aim of this study was to determine the effect of diode laser irradiation on compressive strength of dental amalgam. MET...

BACKGROUND This study was carried out to evaluate the biocompatibility of zeolite-silver-zinc (Ze-Ag-Zn) nanoparticles and their effect on the compressive strength of Mineral Trioxide Aggregate (MTA). MATERIAL AND METHODS Biocompatibility was evaluated by an MTT assay on the pulmonary adenocarcinoma cells with 0.05, 0.1, 0.25, 0.5, 1 and 5 mg/mL concentrations of Ze-Ag-Zn. For compressive str...

Modeling is a very useful method for the performance prediction of concrete. Most of the models available in literature are related to the compressive strength because it is a major mechanical property used in concrete design. Many attempts were taken to develop suitable mathematical models for the prediction of compressive strength of different concretes, but not for self-consolidating high-st...

Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze casting can be applied to s...