The recycling options of spent MgO-C refractories from an electrical arc furnace (EAF) have been evaluated. The economic, quality of spent refractories and products made from it, the ease of implementation of a recycling practice and the interest of steel melt shops were considered. It was decided that the best option of most EAF shops would be to recycle spent MgO-C refractory as a foaming sla...

Abstract There are only a few smelters processing copper concentrates directly into blister copper. Despite the many advantages of this process, serious challenge technology is need to process resulting flash smelting slag. It contains 12–15% and 2.5–4% lead. In form, it cannot be considered as waste material and, therefore, high-temperature reduction carried out. This decopperization energy- t...

Filtration technology is well established in the water sector but is limited by inability to remove targeted contaminants, found in surface and groundwater, which can be damaging to human health. This study optimises the design of filters by examining the efficacy of seven media (fly ash, bottom ash, Bayer residue, granular blast furnace slag (GBS), pyritic fill, granular activated carbon (GAC)...

The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass...

The first part of the project is mainly about changing of slag compositions and see it affect on the inclusions in the ladle furnace. The second part of the project is to study the influence of stirring (EMGAS) on the large inclusions in the steel by changing stirring conditions. The project has done at Uddeholm AB, Hagfors. First, the scrap is melted in ARC furnace then moved to the ladle de-s...

Although Portland cement is the most widely used binder in the stabilisation/solidification (S/S) processes, slag-based binders have gained significant attention recently due to their economic and environmental merits. In the present study, a novel binder, reactive MgO activated slag, is compared with hydrated lime activated slag in the immobilisation of lead and zinc. A series of lead or zinc-...

In this study, the treatment of fly ash and steel making slag in aqueous ammonia chloride has been conducted. These zero-value wastes have distinctively high concentrations of magnesium, calcium and iron. The ammonium chloride has been employed as the leaching reagent to extract MgO out of fly ash and slag, and the dissolved cations in the leachate were subsequently precipitated by carbonation....

A comparative technical and environmental evaluation of products arising from the stabilization/solidification of secondary lead metallurgical slag into a cement matrix was performed. Provided samples of an industrial slag generated in the process of recovery of lead from automotive batteries (Engitec CX process), were used in experimental work. Characterization of slag by X-ray Diffraction (XR...