Corrosion results in hazardous and expensive damage to pipelines, vehicles, water and wastewater systems, and even home appliances. One of the most extensively practical methods for protecting metals and alloys against corrosion is to use organic inhibitors. The inhibition capability of 2-Mercaptobenzothiazole (2-MBT) against the corrosion of carbon steel in a 2 M NaCl solution was examined by ...

the Sol–gel nanocomposite coatings have been investigated for copper metal as a potential replacement for the hazardous and banned hexavalent chromate conversion coatings. TiO2–CdO nanocomposite thin films were deposited on copper using the sol–gel method. The sol-gel coatings were prepared using a sol obtained by the hydrolysis and condensation of tetra-o-butyl titanate. They were doped with c...

In this study, Malvasylvestris flower extract (MFE) was used as a corrosion inhibitor for carbon steel in 1 M HCl solution. Malvasylvestris extract was analyzed by gas chromatography coupled with a mass spectrometry detector (GC-MS). Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies revealed that the inhibition efficiency increases with increasing MFE concent...

Hydroxyethyl cellulose (HEC) was studied as corrosion inhibitor for mild steel and aluminium in 0.5 M H2SO4 solution using weight loss and electrochemical techniques. The results revealed that HEC inhibited corrosion of mild steel and aluminium in sulphuric acid environment. Inhibition efficiency was found to depend on concentration of the inhibitor. Impedance results revealed that HEC was adso...

Corrosion inhibition of aluminum (Al) in hydrochloric acid by anionic polyeletrolyte pectates (PEC) as a water-soluble natural polymer polysaccharide has been studied using both gasometric and weight loss techniques. The results drawn from these two techniques are comparable and exhibit negligible differences. The inhibition efficiency was found to increase with increasing inhibitor concentrati...

Imidazoline and its precursor, amide, are very effective inhibitor intermediates and are widely used in formulating the corrosion products for application in the oil and gas industries. Their high temperature corrosion inhibition performance was evaluated and compared. Our results show that imidazoline and amide offer poor to moderate high temperature/pressure (300 °F/3,000 psig) inhibition per...

A new curcumin derivative, i.e., (1E,4Z,6E)-5-chloro-1,7-bis(4-hydroxy-3-methoxyphenyl)hepta-1,4,6-trien-3-one (chlorocurcumin), was prepared starting with the natural compound curcumin. The newly synthesized compound was characterized by elemental analysis and spectral studies (IR, ¹H-NMR and 13C-NMR). The corrosion inhibition of mild steel in 1 M HCl by chlorocurcumin has been studied using p...

Abstract A novel hybrid sol–gel coating has recently been introduced as an alternative to high toxic chromate-based corrosion protection systems. In this paper, we propose a multiscale computational model to estimate the amount and time scale of inhibitor release of the active corrosion protection coating. Moreover, we study the release rate under the influence of parameters such as porosity an...

Weight loss technique has been used to study the corrosion inhibition efficiency of tin in HNO3 solution by using the leaves and stem extract of different varieties of Holy Basil viz. ocimum basilicum (EB), ocimum cannum (EC) and ocimum sanctum (ES). The results show that all the varieties under study are good corrosion inhibitors, among which leaves extract of EB is the most effective. Corrosi...

The corrosion inhibition of AISI309 austenitic stainless steel by 2,2'-Bipyridyl in 0.5M H 2 SO 4 at 298K was studied using the mass loss’ method, the potentiodynamic polarization (Tafel), the linear polarization (LRP) and the electrochemical impedance spectroscopy (EIS). The results showed a mixed inhibition mode and an increase in the charge transfer resistance, due to inhibitor molecules’ ad...