As one of the main products produced by oral microorganisms, the role of lactic acid in the corrosion of titanium is very important. In this study, the corrosion behavior of titanium in artificial saliva with and without lactic acid were investigated by open-circuit potentials (OCPs), polarization curves and electrochemical impedance spectroscopy (EIS). OCP firstly increased with the amount of ...

Environment safety measurements have resulted in use of peroxide as bleaching chemical in place of chlorine and chlorine dioxide. Concentration and composition of chemicals affects corrosion aspects, the suitability of existing plant metallurgy and materials of construction of bleach plants. Accordingly long term immersion and electrochemical corrosion tests were conducted on stainless steel 30...

Titanium and its alloys have been widely used as implant materials due to their excellent mechanical property and biocompatibility. In the present study, the effect of glucose concentration on corrosion behavior of pure titanium TA2 in Hanks' simulated body fluid is investigated by the electrochemical impedance spectrum (EIS) and potentiodynamic polarization methods. The range of glucose concen...

Air abrasion process is used for cleaning casting surface of prosthetic components, and to prepare the surface of these elements for the application of veneering items. Its side effect, however, is that abrasive particles are embedded in the treated surface, which can be up to 30% of the surface and it constitutes the side effect of this procedure. Such a significant participation of foreign ma...

in the present study, the corrosion behavior of aisi 347 austenitic stainless steel to astm a335 low alloysteel dissimilar joint was investigated. for this purpose, two filler metals, er309l and ernicr-3, were selected to be used during the gas tungsten arc welding process. to investigate the corrosion behavior of the joints after welding, the specimens were tested in 3.5% sodium chloride solut...

The electrochemical behavior of nickel, Inconel 600, Incoloy 800 and 316 stainless steel electrodes in different concentration of NaOH solution was investigated using the cyclic voltammetry technique (CV). All the curves in the anodic branch of the CV are characterized by anodic dissolution peak (A), passive region (B), anodic dissolution peak (C) before oxygen evolution. In the case of the cat...

The influence of the addition of copper on the resistance to pitting corrosion of stainless steels has been investigated using different experimental techniques––current transient analysis, polarization curves in acidic media, pitting and repassivation potential measurements, XPS and SEM observations––so that pit initiation, propagation and repassivation could be analysed separately. Copper add...