The driving force that causes metals to corrode is a natural consequence of their temporary existence in metallic form. Application of cathodic protection (CP) as measures to stop corrosion has a very long history. The first application of impressed current system for protection of underground structures took place in England and in the United States, about 1910-1912. The first criterion for CP...

The general and galvanic corrosion of high strength steel (980), high strength steel (907) and high strength steel (921A) in seawater at elevated temperatures has been analyzed using electrochemical measurements and a zero-resistance ammeter (ZRA). After the tests, the surface morphologies of the samples have been detected by SEM. Results show galvanic corrosion behavior of 980/907/921A fulfill...

The local electrochemical properties of galvanic corrosion for three coupled metals in a desalination plant were investigated with three wire-beam electrodes as wire sensors: aluminum brass (HAl77-2), titanium (TA2), and 316L stainless steel (316L SS). These electrodes were used with artificial seawater at different temperatures. The potential and current-density distributions of the three-meta...

Corrosion is a relatively slow material degradation process to which metallic structures of aircraft are subjected during service and it can appear in many forms. Generally, corrosion protection for preventing or inhibiting the formation and growth of corrosion damage on aircraft structures is well-established technology. Unfortunately, despite preventive measures, corrosion does occur and its ...

We outline the ability of zinc phosphate coatings, obtained by chemical conversion, to protect mild steel rebars against localized corrosion, generated by chloride ions in alkaline media. The corrosion resistance of coated steel, in comparison with uncoated rebars and coated and uncoated steel rebars embedded in mortar, were evaluated by open-circuit potential, potentiodynamic polarization, cro...

Al–TiC nanocomposite materials have been prepared by a new in situ synthesizing technique. A mixture of aluminum, titanium, and graphite has been prepared using ball milling technique and then melted in a high frequency induction heat furnace (HFIHF) at different sintering temperatures, namely 900, 1100, and 1300 °C. The effect of sintering temperature on the corrosion of the Al–TiC composite i...

Corrosion of structural steel in an SRB containing environment for as long as 9 months, is studied using the Electrochemical Noise Analysis technique. The results show that the activity of the system, which was very low initially, started to increase after 6 months exposure to the environment. The power spectral density curves of the Electrochemical Potential Noise of the system, using the maxi...

nano-films consisting of an alternating sequence of positively and negatively charged polyelectrolyteshave been prepared by means of the electrostatic layer-by-layer sequential assembly technique on mildsteels. the mild steels were pretreated electrochemically to modify the mild steel surface. the modificationof the mild steel surface resulted in increasing the adhesion of the obtained nano-fil...