The cracking resistance of Alloy 600, Alloy 690 and their welds, EN82H and EN52, was characterized by conducting JICtests in air and hydrogenated water. All test materials displayed excellent toughness in air and high temperature water, but Alloy 690 and the two welds were severeiy embrittled in low temperature water. In 54°C water with 150 cc Hz/kg H20, JICvalues were typically 70~o to !35Y0 ]...

Susceptibility of three lean-alloyed ferritic-austenitic stainless steels to hydrogen-induced delayed cracking was examined, concentrating on internal hydrogen contained in the materials after production operations. The aim was to study the role of strain-induced austenite to martensite transformation in the delayed cracking susceptibility. According to the conducted deep drawing tests and cons...

In this paper, the post-cracking tensile behavior of Ultra-High Performance Cementitious Composites (UHPCC) was studied and an improved analytical model to predict the behavior depending on the fiber orientation distribution was proposed. Two different casting methods were adopted to estimate the influence of the casting method on the tensile behavior. The direct tensile test results showed tha...

While Portland cement concrete (PCC) overlay has been increasingly used as a rehabilitation technique for deteriorated PCC pavements in the last decade, reflective cracking places a major limit on its durability performance. The use of ultra ductile concrete named Engineered Cementitious Composite (ECC) should arrest such failure mode and greatly enhance the long term performance of the overlai...

A statistical pattern recognition technique was developed based on the time series analysis to detect cracking in steel reinforced concrete structures using vibration measurements. The technique has been developed for the Sydney Harbour Bridge. The measurements were collected from single and tri-axial accelerometers, which were integrated into sensor nodes that were developed at the National IC...

Normally closed (NC) micro check-valve is used to stop liquid flow when liquid pressure difference across the membrane is lower than the designed cracking pressure. As shown in Figure 2-1, when the applied pressure P is lower than the designed cracking pressure, P c , the NC check-valve is closed, and vice versa. Generally the cracking pressure can be introduced electrically such as electromagn...

The initiating explosive devices are prohibited in rock breaking near the goaf of the highly gassy mine. It is effective and applicable to cracking the hard roof with static cracking agent. By testing the static cracking of cubic limestone (size: 200 × 200 × 200 mm) with true triaxial rock mechanics testing machine under the effect of bidirectional stress and by monitoring the evolution process...

It is broadly accepted that so-called 'thermal' gas is the product of thermal cracking, 'primary' thermal gas from kerogen cracking, and 'secondary' thermal gas from oil cracking. Since thermal cracking of hydrocarbons does not generate products at equilibrium and thermal stress should not bring them to equilibrium over geologic time, we would not expect methane, ethane, and propane to be at eq...