AIM AND OBJECTIVES To evaluate the elution of bisphenol A-glycidyl methacrylate (BisGMA) and triethylene glycol dimethacrylate (TEGDMA) from two bulk-fill composites at different polymerization times, for different storage periods when cured with quartz-tungsten-halogen (QTH) curing unit. MATERIALS AND METHODS Tetric N-Ceram bulk fill and EverX Posterior were analyzed using high-performance l...

changed under ambient condition for at least 40 h, time to which these measurements were carried out. To investigate the absorption behavior as a function of time, the absorption spectrum at 100 OC was taken at regular intervals over 40 h for poled/cured A204/DR1. An absorption peak at A, , = 508 nm existed before poling/curing. After poling/curing &shifta to 493 nm with a decrease of absorbanc...

Epoxy – Polysulfide copolymers without or with low amounts of epoxy in their structure have poor mechanical properties in oxidative curing system.To strengthen the mechanical properties of polysulfide elastomer inclusion of epoxy resin (Epon828) as hard segment was studied. FT-IR spectroscopy and rheometry were used to verify the formation of epoxy-polysulfide copolymer.  Results obtained f...

Near-IR reflectance spectroscopy has been used to study the curing of ethyl cyanoacrylate adhesive on polished dental glass and microscope slide substrates. The effects of changing the glue film thickness and the type of substrate on the curing rate have been investigated whilst maintaining a constant humidity. The FTIR spectral data has been used to calculate and plot the extents of cure versu...

This paper compares the alkali-activated fly ash (AAFA) manufactured with thermal oven curing and pulsed microwave curing methods. Fly ash activated by 8M NaOH solution at a liquid to solid ratio of 0.3 was cured by thermal oven at 85°C and domestic microwave oven, respectively. Apart from compressive strength test, the temperature profiles of AAFA samples were captured by thermal camera. React...

Concrete is an essential building material which is widely used in construction industry all over the world due to its compressible strength. Curing of concrete plays a vital role in durability and other performance necessities. Improper curing can affect the concrete performance and durability easily. When areas like scarcity of water, structures is not accessible by humans external curing can...

OBJECTIVES The aim of this study was to evaluate the effects of different light sources and curing time on the degree of conversion and microhardness of two surfaces within a nanofilled composite resin. METHODS Four experimental groups (n=10) were formed in accordance with the light source (quartz-tungsten halogen (QTH - 600mW/cm(2)), or light-emitting-diode (LED - 800mW/cm(2))) and the time ...

epoxy – polysulfide copolymers without or with low amounts of epoxy in their structure have poor mechanical properties in oxidative curing system.to strengthen the mechanical properties of polysulfide elastomer inclusion of epoxy resin (epon828) as hard segment was studied. ft-ir spectroscopy and rheometry were used to verify the formation of epoxy-polysulfide copolymer.  results obtained from ...

objectives: the aim of this in-vitro study was to assess the thermal effect of light emitting diode (led) light curing unit on the enamel etching time. materials and methods: three treatment groups with 15 enamel specimens each were used in this study: g1: fifteen seconds of etching, g2: five seconds of etching, g3: five seconds of etching plus led light irradiation (simultaneously). the micro ...