Turbine machinery has an extraordinary wide range of applications in the aviation, aerospace, automotive, energy and many other industries. The turbine blade is one of the most important parts of turbine machinery, and the characteristic parameters, pressure ratio of the engine and rotating speed of the turbine are all related to the shape and size of blades. Therefore, the profile measurement ...

terms of pre-selection of the aero layouts best suited for further optimization Abstract The first task within the STOW project was 'analytical – theoretical study in terms of pre-selection of the aero layouts best suited for further optimization' for universal Polish wind conditions. It was carried out by an extensive literature study on classic wind turbine configurations (two, tree –bladed h...

A solar chimney power plant consists of four main parts, a solar collector, a chimney, an energy storage layer, and a wind turbine. So far, several investigations on the performance of the solar chimney power plant have been conducted. Among them, different approaches have been applied to model the turbine inside the system. In particular, a real wind turbine coupled to the system was simulated...

Annoyance, recognition and detection of noise from a single wind turbine were studied by means of a two-stage listening experiment with 50 participants with normal hearing abilities. In-situ recordings made at close distance from a 1.8-MW wind turbine operating at 22 rpm were mixed with road traffic noise, and processed to simulate indoor sound pressure levels at LAeq 40 dBA. In a first part, w...

A review of recent advances in the use of surface integral methods in Computational AeroAcoustics (CAA) for the extension of near-field CFD results to the acoustic far-field is given. These integral formulations (i.e. Kirchhoff’s method, permeable (porous) surface FfowcsWilliams Hawkings (FW-H) equation) allow the radiating sound to be evaluated based on quantities on an arbitrary control surfa...

A short overview of composite materials for wind turbine applications is presented here. Requirements toward the wind turbine materials, loads, as well as available materials are reviewed. Apart from the traditional composites for wind turbine blades (glass fibers/epoxy matrix composites), natural composites, hybrid and nanoengineered composites are discussed. Manufacturing technologies for win...

As a system using a conventional unidirectional air turbine in oscillating water column (OWC) based on a wave energy plant, a twin unidirectional impulse turbine topology has been suggested in previous studies. However, the average efficiency of the suggested twin turbine is considerably lower than that of a conventional unidirectional turbine in this topology because reciprocating air flow can...

In the Modern scenario, the naturally available resources for power generation are being depleted at an alarming rate; firstly due to wastage of power at consumer end, secondly due to inefficiency of various power system components. A Combined Cycle Gas Turbine (CCGT) integrates two cycles- Brayton cycle (Gas Turbine) and Rankine cycle (Steam Turbine) with the objective of increasing overall pl...

Wind turbines are increasingly becoming significant components of power systems. To evaluate competing wind energy conversion technologies, a real-time Wind Turbine Emulator, which emulates the dynamic torque produced by an actual turbine has been developed. This is necessary since the real world performance of a wind turbine, subjected to variable wind conditions is more difficult to evaluate ...

Maximizing turbine up-time and reducing maintenance costs are key technology drivers for wind turbine operators. Components within wind turbines are subject to considerable stresses due to unpredictable environmental conditions resulting from rapidly changing local dynamics. In that context, systems health management has the aim to assess the state-of-health of components within a wind turbine,...