Abstract. The mechanical and damage behavior of a X100 steel after prestrain is studied in this work. Experimental results show both a plastic and rupture anisotropy: the T direction exhibits a higher ultimate stress but the lowest ductility and toughness. Prestrain reduces ductility and crack growth resistance. A model able to represent the plastic and damage behaviour of the material before a...

Nanostructured bainite was obtained in high-carbon Si-Al-rich steel by low-temperature (220-260 °C) isothermal transformation after austenitisation at different temperatures (900 °C, 1000 °C, and 1150 °C). Improved strength-ductility-toughness balance was achieved in the nanostructured bainitic steel austenitised at low temperatures (900 °C and 1000 °C). Increasing the austenitising temperature...

Nanotwinned metals exhibit an unusual combination of ultrahigh strength, considerable ductility and enhanced rate sensitivity. We find that a Hall–Petch-type relationship closely fits the experiment data of activation volume as a function of twin spacing. The results suggest a transition of the rate-controlling mechanism from intra-twinto twin-boundary-mediated processes with decreasing twin la...

The ductility and plastic flow behavior of highly aligned nanotwinned copper produced by interrupted magnetron sputtering is investigated. Tensile tests were performed at various strain rates at both room and liquid nitrogen (77 K) temperatures. Higher ductility and strength are reported for all samples tested at 77 K. The observed inhomogeneous deformation and shear band propagation are discus...

Ambient and cryogenic surface mechanical attrition treatments (SMAT) are applied to bcc iron plate. Both processes result in significant surface grain refinement down to the ultrafine-grained regime; the cryogenic treatment results in a 45% greater grain size reduction. However, the refined region is shallower in the cryogenic SMAT process. The tensile ductility of the grain size gradient remai...

A proper composition of stiffness and ductility parameters is required to obtain a resistant and economic structure. Accordingly, Chevron Knee Braced Frame (CKBF) seems appropriate due to its proper seismic performance. The advantage of this system comes to having the capability of rapid and cheap replacement of chevron knee elements after an earthquake occurs. In this research, response modifi...

The influence of alloy composition of lowmelting Sn-Bi-Cu lead-free solder alloys on mechanical properties and solder joint reliabilities were investigated. The mechanically optimum alloy composition is Sn-40Bi-0.1Cu (mass%). The addition of 40mass%Bi improves the ductility and restrains the fillet-lifting, which are problems of lead-free solders with Bi. The addition of copper improves both th...

Shear bands generally initiate strain softening and result in low ductility of metallic glasses. In this Letter, we report high-resolution electron microscope observations of shear bands in a ductile metallic glass. Strain softening caused by localized shearing was found to be effectively prevented by nanocrystallization that is in situ produced by plastic flow within the shear bands, leading t...

The microstructure and tension ductility of a series of Ti-based bulk metallic glass matrix composite (BMGMC) is investigated by changing content of the β stabilizing element vanadium while holding the volume fraction of dendritic phase constant. The ability to change only one variable in these novel composites has previously been difficult, leading to uninvestigated areas regarding how composi...

abstract for seismic design, it is important to estimate the, maximum lateral displacement (inelastic displacement) of the structures due to earthquakes for several reasons. seismic design provisions estimate the maximum roof and storey drifts occurring in major earthquakes by amplifying the roof displacement and drifts of the structures obtained by elastic analysis subjected to seismic design ...