The Electro-Fenton oxidation process is one of the essential advanced electrochemical processes used to treat Phenol and its derivatives in wastewater. was carried out at an ambient temperature different current density (2, 4, 6, 8 mA/cm2) for up 6 h. Sodium Sulfate a concentration 0.05M as supporting electrolyte, 0.4 mM Ferrous ion (Fe2+) catalyst. electrolyte cell consists graphite modified b...

The cyclic voltammetry (CV) technique was accustomed to look into the electro oxidation of iron ions in water using a novel carbon paste electrode CPE enhanced with oxide nanoparticles. revised exhibited high resolving function, allowing overlapping voltametric response Fe-ion be resolved single well-defined peak. voltage differential between Epa (anodic) and Epc (cathodic) higher than 200 mV; ...

objective: medically unexplained symptoms are physical symptoms, which cannot be explained by organic ‎causes. this study aimed to investigate mental health in patients with medically unexplained ‎physical symptoms. ‎ method: one hundred outpatients who were admitted to the electro diagnosis clinic of imam khomeini ‎hospital, ahvaz/iran, participated in this study. data were collected using phy...

the electro discharge machining (edm), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. in this study, effect of ...

in this work, we developed a method which combined the processes of acid-leaching, ammonium jarosite precipitating and electro-depositing to recover copper and nickel from electroplating sludge. residual sludge from an electroplating plant located in qingdao was used for acid-leaching, and more than 95% of copper, nickel, zinc, chromium and iron were extracted from the sludge. after acid-leachi...

electro-thermo-elastic stress analysis of piezoelectric polymeric thick-walled cylinder reinforced by boronnitride nanotubes (bnnts) subjected to electro-thermo-mechanical fields is presented in this article. the electro-thermo-elastic properties of piezoelectric fiber reinforced composite (pefrc) was studied by a modified xy micromechanical model capable of exhibiting full coupling relation be...

Quadratic electro-optic effects (QEOEs) and electro-absorption (EA) process in a GaN/AlGaN spherical quantum dot are theoretically investigated. It is found that the magnitude and resonant position of third-order nonlinear optical susceptibility depend on the nanostructure size and aluminum mole fraction. With increase of the well width and barrier potential, quadratic electro-optic effect and ...

In this work, the robust position control scheme is proposed for the electro-mechanical system using the disturbance observer and backstepping control method. To the external unknown load of the electro-mechanical system, the nonlinear disturbance observer is given to estimate the external unknown load. Combining the output of the developed nonlinear disturbance observer with backstepping techn...

Electro-oxidation reactions using a nickel anode were carried out on the calcium-spent liquor effluent obtained from Sappi Saiccor (formerly South African Industrial Cellulose Corporation) dissolving pulp mill as well as on ligninand lignan-type compounds previously identified in the effluent. Voltammograms were obtained for each solution in order to identify the oxidation potentials of the com...

This work is concerned with the diffraction and scattering of plane electro-acoustic waves by an interfacial crack between two dissimilar piezoelectric half-spaces. An exact solution is obtained for the full scattering field around the tip of the interfacial crack that is loaded with both acoustic SH and electric incident waves. First, it has been found that the interfacial crack is not complet...