Electromagnetic forming is a high energy rate forming process in which an electromagnetic Lorentz body force is used for deformation of products.  In this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method.  The effect of important process parameters such as discharge energy, radius and width of rectangular groove on the strength of the asse...

Electromagnetic forming is a high energy rate forming process in which an electromagnetic Lorentz body force is used for deformation of products.  In this article, electromagnetic forming process was simulated for the assembly of parts as an innovative method.  The effect of important process parameters such as discharge energy, radius and width of rectangular groove on the strength of the asse...

To prevent serious electromagnetic interference, a single-layer and double layer wave-absorbing coating employing complex absorbents composed of carbon black with epoxy resin as matrix was prepared. The morphologies of carbon black /epoxy composites were characterized by scanning electron microscope  and atomic force microscope, respectively. The carbon black  particles exhibit obvious polyarom...

In this digest, we will present a methodology that allow us to accommodate the conducted Electromagnetic Interference (EMI) generated by power factor correctors to international standards in the design step. EMI filter design considerations and EMI predictive procedures are presented. The predictive procedures are based in a family of curves that allows us to determine the conducted Electromagn...

The last two decades have witnessed increased interest in High-Power Electromagnetics (HPEM), particularly generation of high-power electromagnetic fields and their effects on electronics. Up to now most investigations on HPEM are characterizing the HPEM environment (e.g. source output, HPEM threat) employing frequency domain parameters of classical EMC. Nevertheless an efficient discussion of ...

Microwave absorbing materials are usually designed to solve protection against electromagnetic interference in wireless communication systems and high frequency circuit mechanisms. In this research polystyrene (PS) nanocomposites containing various nano-fillers were successfully synthesized. The novelty of this work is comparing of three various nanostructures: non-metallic conductive graphene ...

The front-end electronics (FEE) noise characterization to electromagnetic interference and the compatibility of the different subsystems are important topics to consider for the LHC calorimeter upgrades. A new power distribution scheme based on switching power converters is under study and will define a noticeable noise source very close to the detector’s FEE. Knowledge and experience with both...

This paper presents a case study of the impacts of 25kV traction power system on railway signalling system using copper cables as communication links. Several forms of interferences including electromagnetic including and conductive have been investigated and remedial measures implemented, with satisfactory results. Key-Words : Traction Power System, electromagnetic interference, railway signal...

High-frequency electromagnetic fields in the 120 kHz band emitted from card readers for access control systems caused abnormally high doses on electronic pocket dosimeters (EPDs). All EPDs recovered their normal performance by resetting after the exposure ceased. The electric and magnetic immunity levels of the EPDs were estimated by using the distances needed to prevent electromagnetic interfe...