Arsenic, one of the most toxic and dangerous elements in the environment affecting millions of people around the world, is associated with several diseases. In this pilot study, we investigated removal of arsenate from aqueous solutions using chitosan under the influences of initial arsenic ion concentrations, pH, contact time, and adsorbent dosages of chitosan. In order to assess the sorption ...

Activated carbon was prepared from Enteromorpha prolifera by zinc chloride activation. The adsorption behaviors of three reactive dyes (Reactive Red 23, Reactive Blue 171 and Reactive Blue 4) onto this biomass activated carbon were investigated in batch systems. The experimental findings showed that the removal efficiencies of three dyes onto activated carbon were maximum at the initial solutio...

The effective removal of heavy metals from aqueous wastes is among the most important issues for many industrialized countries. Removal of arsenic (As) from aqueous solutions was studied using Rhazia stricta biomass. The batch experiments are carried out to investigate the effect of the significant process parameters such as pH, contact time, solute concentration and adsorbent dose. The optimum...

The adsorption of Cr(III) and As(III) by using coal ash from thermal power plants in batch mode ,The effect of adsorbent agitation speed, dose, pH, contact time and agitation speed on the adsorption of Cr(III) and As(III) by coal ash is examined. Adsorption equilibrium was achieved in 50–55 min. The Langmuir, Temkin and Freundlich adsorption isotherms were used to observed sorption phenomena. T...

Removal of brilliant red (C. I. Reactive Red 2) from aqueous solutions by adsorption on fish scales of Labeo rohita was investigated. Batch adsorption experiments were carried out under different experimental conditions such as contact time, initial concentration of dye solutions, temperature and pH of the solution. The optimum pH for the adsorption experiment was found to be 7.2. The equilibri...

Reaction of NiCl2·6H2O, D-camphoric acid (D-H2cam), and N,N′-bis(pyraz-2-yl)piperazine (bpzpip) in pure water at 150 ◦C afforded a novel nickel(II) coordination layer, [Ni4(D-cam)2(D-Hcam)4(bpzpip)4(H2O)2] (1), under hydro(solvo)thermal conditions. Single-crystal X-ray structure analysis reveals that 1 adopts a six-connected two-dimensional (2D) chiral layer structure with 36-hxl topology. Dye ...

Removal of cesium from synthetic aqueous solution through adsorption on vermiculite, under batch equilibrium experimental condition at six initial values of pH (3, 4, 6, 9, 11 and 12) and five temperatures (25, 50, 75, 85 and 95 °C) has been investigated. It is necessary to propose a suitable model for a better understanding of the mecha...

In this study, the adsorption of amoxicillin onto activated carbon was investigated. The effect of particle size and the effluent flow rate was discussed as well as the kinetics and isotherm of adsorption equilibrium. The isotherm equilibrium studies showed that the Langmuir model was appropriate for describing the adsorption equilibrium of amoxicillin onto the activated carbon. Furthermore, th...

Adsorption of Nickel(II) ion onto Activated Carbon prepared from Delonix regia pods activated with Zinc chloride (DRZAC) under various experimental conditions were studied. Batch mode adsorption experiments were conducted. The characteristics of the DRZAC were determined by SEM, XRD, FTIR, BET analysis and pHZPC. The maximum removal efficiency of Ni(II) ion is 85% at pH 6. Under the chosen cond...

A low-cost activated carbon (XSBLAC) prepared from XanthocerasSorbifoliaBungehull via chemical activation was investigated to determine its adsorption and desorption properties for zinc(II) ions from aqueous solutions. XSBLAC was characterized based on its N₂-adsorption/desorption isotherm, EDX, XRD, SEM and FTIR results. An adsorption study was conducted in a series of experiments to optimize ...