sandwich sheet rolling process is investigated using an analytical method (slab method) and a numerical method (finite element method). the horizontal stress distribution in the layers, the rolling pressure along the contact interface and the neutral point between the roll and the sheet are investigated. then the affects of the parameters such as the friction between the sheet and the roll, she...

in this paper, the axisymmetric corrugated diaphragm using finite element method will be discussed, so that half of these diaphragms’ cross sections and later the applied pressure will be considered. following this, using the consequent equations and visual basic software, a computer program will be provided which receives the diaphragms’ particulars such as diameter, thickness, pressure and th...

in this study, focuses on applying the hp-version for forward modeling. the eit forward solver is normally based on the conventional finite element method (hfem). in h-fem, the polynomial order p of the element shape functions is constant and the element size h, is decreased. to accurately simulate the forward solution with the hfem, a mesh with large number of nodes and elements is usually need...

in this study, an extended stress-based forming limit diagram (fld) for prediction of necking based on the marciniak and kucznski (m-k) model is represented and applied in tube hydroforming. the bulge forming of a straight tube is simulated by finite element method and verified with published experimental data. this adaptive simulation technique is based on the ability to detect the onset and g...

condition monitoring of bldc motors due to their important applications is gaining more and more significance. rotor eccentricity is one of the most important sources of faults in these motors. up to now, detection methods of this fault under nonstationary conditions are limited to complicated and time-consuming methods using wavelets and cohen class algorithms which are difficult to implement ...

The nite element method is now well established as a robust and reliable numerical technique in many areas of solid mechanics. There are however problems where the use of the nite element method is cumbersome like the modeling of moving discon-tinuities due to the need to update the mesh to match the geometry of the discontinuity. Even for stationary cracks, in three-dimensional solids, contsru...

We consider a standard model for incompressible two-phase flows in which a localized force at the interface describes the effect of surface tension. If a level set (or VOF) method is applied then the interface, which is implicitly given by the zero level of the level set function, is in general not aligned with the triangulation that is used in the discretization of the flow problem. This non-a...