Articular cartilages and menisci are generally considered to be elastic in the published human knee models, and thus the fluid-flow dependent response of the knee has not been explored using finite element analysis. In the present study, the fluid pressure and site-specific collagen fiber orientation in the cartilages and menisci were implemented into a finite element model of the knee using fi...

The fundamental frequencies and mode shapes of steel and carbon fiber–reinforced plastic (CFRP) cylindrical shells with steel inserts were investigated using finite element analysis and modal testing. The free-free boundary condition was tested with modal testing using the roving hammer method and verified by finite element analysis using ABAQUS. The results show good agreement between the test...

Abstract Fiber optical strain sensors are used to measure the at a particular sensor position inside fiber. In order deduce in surrounding matrix material, one can employ transfer principle. Its application is based on assumption that presence of fiber does not impede deformation material direction. fact, principle implies direction carries over verbatim material. For comparatively soft however...

Left-ventricular remodeling is considered to be an important mechanism of disease progression leading to mechanical dysfunction of the heart. However, the interaction between the physiological changes in the remodeling process and the associated mechanical dysfunction is still poorly understood. Clinically, it has been observed that the left ventricle often undergoes large shape changes, but th...

Left ventricular dimensions from routine clinical one-plane cineangiograms were combined with left ventricular pressure measurements to permit calculation of left ventricular wall stresses. The 25 patients included 12 with normal left ventricular dynamics, 6 with volume overload, 3 with outflow obstruction, and 4 with cardiomyopathy. Average stresses calculated on the basis of an ellipsoid mode...

agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. a mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. in each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...

In this paper, the first and second order approximations of Taylor expansion are used for calculating the change of each natural frequency by modifying an arbitrary parameter of a system with a known amount and based on this approximation, the inverse eigenvalue problem is transformed to a solvable algebraic equation. The finite element formulation, based on the classical laminated plate theory...

During recent years, the use of fiber-reinforced polymers (FRP) as a desirable alternative for improving the behavior of lateral resisting system are known. There are various factors influencing the quality of such kind of rehabilitation. This study aims to investigate the influence of geometric characteristics and arrangement of FRP layers on rehabilitating of concrete shear walls.  A few rein...

Additive manufacturing technologies offer new ways to fabricate cellular materials with composite cell walls, mimicking the structure and mechanical properties of woods. However, materials limitations and a lack of design tools have confined the usefulness of 3D printed cellular materials. We develop new carbon fiber reinforced, epoxy inks for 3D printing which result in printed materials with ...

Abstract In this study, a mathematical model is proposed for CO2 separation from N2/CO2 mixtureusing a hollow fiber membrane contactor by various absorbents. The contactor assumed as non-wetted membrane; radial and axial diffusions were also considered in the model development. The governing equations of the model are solved via the finite...