Fiber-reinforced composite (FRP) materials have gained an increasing success, mostly for strengthening, retrofitting and repair of existing historic masonry structures and may cause a significant enhancement of the mechanical properties of the reinforced members. This article summarizes the results of previous experimental activities aimed at investigating the effectiveness of GFRP (Glass Fiber...

Fiber-reinforced composites have a wide range of industrial applications owing to their light weight, high modulus, and good specific strength. Trimming using mechanical punching tool is the fastest way post process fiber-reinforced composites. However, quantitative analyses defects parameters are required analyze damage mechanisms achieve high-quality cut surfaces. In this study, we quantitive...

in this paper the traditional covering plaster of masonry buildings is supplied with polypropylene and steel fiber to enhance their seismic behavior. the plaster mix proportion is determined by some initial mortar tests. also, one story, single span masonry building specimen plastered with different mortars is tested on a shaking table 8 times under a seismic input and the performance of the sp...

objective : the aim of this study was to evaluate fracture characteristics of rigid two-tooth segments splinted with fiber reinforced composite (frc), with and without application of simulated masticatory forces. material and methods: in this experimental study, 80 extracted maxillary bicuspids were joined in pairs from the buccal aspect using frc. the specimens were divided into two groups. in...

A non-destructive measuring technique to determine the fiber content in hardened steel fiber reinforced concrete is presented. The technique is based on an accurate open-ended coaxial probe reflectometry method for measuring the effective permittivity of the fiber reinforced concrete and on a mixing rule from the classical homogenization theory for deriving the fiber content from the measured p...

Numerical and analytical studies of the onset of percolation in high-aspect-ratio fiber fiber systems such as nanotube reinforced polymers available in the literature have consistently modeled fibers as penetrable, straight, capped cylinders, also referred to as spherocylinders. In reality, however, fibers of very high-aspect ratio embedded in a polymer do not come into direct physical contact ...

This paper propose a new concept of an eddy current (EC) multi-element sensor for the characterization of carbon fiber-reinforced polymers (CFRP) to evaluate the orientations of plies in CFRP and the order of their stacking. The main advantage of the new sensors is the flexible parametrization by electronical switching that reduces the effort for mechanical manipulation. The sensor response was...

The composite group investigates endlessly the features of natural fiber/thermoplastic matrix materials to improve recyclability, use renewable sources, and reduce material costs. In this context, development biodegradable polymers for composites is considered one important strategies reducing environmental challenges. Here, axially oriented fibers incorporated in conforming matrices make up fi...

Abstract Fiber reinforced polymer (FRP) rebars have increasing popularity in the construction industry all around world although steel are widely used for reinforcing of concrete so far. FRP bars, which higher tensile strength compared to with same nominal diameter under normal conditions, composed resin matrix and fibers. In this paper, load-bearing capacity after elevated temperature expositi...