نتایج جستجو برای: flexural and tensile stiffness
تعداد نتایج: 16839478 فیلتر نتایج به سال:
The aim of the present study is to investigate the effect of variation of polypropylene fibres ranging from 0.1% to 0.4% along with 0.8% steel fibres on the behaviour of fibrous concrete. The mechanical properties of the concrete such as compressive and tensile strength have been investigated. The result shows that addition of polypropylene fibre has a little effect on the compressive strength,...
The main objective of incorporating natural fibers such as Henequen microfibers (NF) into the High Density Polyethylene (HDPE) polymer matrix is to reduce the cost and to enhance the mechanical as well as other properties. The Henequen microfibers were chopped manually to 5-7mm in length and added into the polymer matrix at the optimized concentration of 8 wt %. In order to facilitate the link ...
The use of Engineered Cementitious Composites (ECC) for structural design requires a number of assumptions of the material, some of which can be drastically different from those suitable for normal concrete and tension-softening fiber reinforced concrete. This contribution focuses on design assumptions of the constitutive models of ECC in tension and compression. Specifically, while the tensile...
Artificial inflation of corpora cavernosa from the nine-banded armadillo (Dasypus novemcinctus) showed that the expansion of the tunica albuginea during erection increases both components of flexural stiffness: the second moment of area and Young's modulus of elasticity. Folded tissue and crimped collagen fibers in the tunica albuginea permit its expansion during erection. As the tunica albugin...
Existing underground pipe jacking methods use a reinforcing rod in a steel tube to obtain structural stiffness. However, some problems such as inconvenience of works and expensive materials resulted from limited working space and reinforcing works are existed. To resolve these problems, a new pipe jacking method, namely PST (Prestressed Segment Tunnel) method, was developed which used joint to ...
OBJECTIVES Direct-filling resin composites are used in relatively small restorations and are not recommended for large restorations with severe occlusal-stresses. The aim of this study was to reinforce composites with fiber preforms, and to investigate the effects of layer thickness and configurations on composite properties. It was hypothesized that fiber preforms would significantly increase ...
this research paper presents the use of wasteful supplementary cementitious materials like fly ash and silica fume to conserve the cement used in concrete. the cement industry is one of the major producers of greenhouse gases and an energy user. in this study, portland cement was used as a basic cementitious material. fly ash and silica fume were used as the cement replacements by weight. the r...
Decreased passive stiffness of cardiac myocytes and cardiac tissue from copper-deficient rat hearts.
Passive stiffness characteristics of isolated cardiac myocytes, papillary muscles, and aortic strips from male Holtzman rats fed a copper-deficient diet for approximately 5 wk were compared with those of rats fed a copper-adequate diet to determine whether alterations in these characteristics might accompany the well-documented cardiac hypertrophy and high incidence of ventricular rupture chara...
Explosion occurs mainly due to unforeseen factors, such as terrorist attacks or performance disruption leading to explosion in facilities and infrastructure caused by fatigue and non-compliance with regulations. Considering the special status of reinforced concrete structures in the construction industry and the extensive usage of the lateral load-bearing system of flexural frames, this researc...
Existing underground pipe jacking methods use a reinforcing rod in a steel tube to obtain structural stiffness. However, some problems such as inconvenience of works and expensive materials resulted from limited working space and reinforcing works are existed. To resolve these problems, a new pipe jacking method, namely PST (Prestressed Segment Tunnel) method, was developed which used joint to ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید