Abstract Marine terraces have long been used as baseline geodetic markers of relative past sea levels, reflecting the interaction between vertical crustal movements and sea level oscillations. The terraces age and elevation of shoreline angles can be used to determine uplift rate. Disparate uplift rates in pervious investigation in the study area are related to manual measurements based on ...

This paper deals with the time-optimal operation and parameter estimation problem of a general diafiltration process in the presence of fouling. Fouling stands for one of the dominant problems in the membrane separation processes. The dynamic behavior of the fouled membrane is described by a general fouling model taken from literature. An Extended Kalman filter is proposed for the recursive est...

Membrane fouling during particle filtration occurs through a variety of mechanisms, including internal pore clogging by contaminants, coverage of pore entrances, and deposition on the membrane surface. Each of these fouling mechanisms results in a decline in the observed flow rate over time, and the decrease in filtration efficiency can be characterized by a unique signature formed by plotting ...

In this paper, we deal with the model-based time-optimal operation of a batch diafiltration process in the presence of membrane fouling. Membrane fouling poses one of the major problems in the field of membrane processes. We model the fouling behavior and estimate its parameters using various methods. Least-squares, least-squares with a moving horizon, recursive least-squares methods and the ex...

The effect of backwash frequency (15, 30 and 60 min) and influent flux (3.75, 7.50 and 11.25 L/h/m) on fouling amelioration in an innovative external side-stream dead-end microfiltration anaerobic membrane bioreactor (AnMBR) for the treatment of domestic wastewater at 25EC was investigated. During 6 months of reactor operation, a constant COD removal of 88% and an accumulation of 350 mg TSS/L/d...

This study compared membrane fouling in a sponge-submerged membrane bioreactor (SSMBR) and a conventional membrane bioreactor (CMBR) based on sludge properties when treating synthetic domestic wastewater. In the CMBR, soluble microbial products (SMP) in activated sludge were a major contributor for initial membrane fouling and presented higher concentration in membrane cake layer. Afterwards, m...

We report on the marine fouling and fouling release effects caused by variations of surface mechanical properties and microtopography of engineering polymers. Polymeric materials were covered with hierarchical micromolded topographical patterns inspired by the shell of the marine decapod crab Myomenippe hardwickii. These micropatterned surfaces were deployed in field static immersion tests. PDM...

Optimization of evaporators with respect to fouling will lead to an increase in runtime and production capacity. Unfortunately optimization processes are often trial-and-error based because the exact mechanism and rate of fouling are not known. This makes the optimization process inefficient and results are often sub-optimal. In order to improve the optimization process a predictive model was d...

Membrane fouling is considered to be the most serious drawback in wastewater treatment when using membrane bioreactors (MBRs), leading to membrane permeability decrease and efficiency deterioration. This work aims to develop an integrated methodology for membrane fouling control, using powdered activated carbon (PAC), which will enhance the adsorption of soluble microbial products (SMP) and imp...

During the electrochemical analysis or disposal of most of phenolic compounds, insulated polymeric substrates are created and cover the electrode surface. This can cause the signal current to decay over time, which is called electrode fouling or electrode passivation. This paper describes a model based on the potential drop across the fouling layer that is helpful for deeper understanding of th...