The purpose of this study was to determine how two types of sampling data could be used for an exposure assessment in a beryllium shop at the Department of Energy's Rocky Flats Plant. Beryllium exposure was assessed via fixed airhead (FAH) sampling, in which the filter cassette was affixed to the machine, generally within a few feet of the worker's breathing zone. Approximately 500,000 FAH samp...

Monitoring the carbon dioxide exhaust of an oxygenator is an inexpensive method to accurately predict and control the arterial carbon dioxide tension during cardiopulmonary bypass (CPB). The partial pressure of carbon dioxide in the exhaust ventilating gas (p exCO 2) was continuously monitored from the capnograph port of the Sorin Monolyth oxygenator during CPB. At the time of routine arteria...

OBJECTIVES Suspended indium dust in an indium-recycling plant was quantified, in order to improve the work environment and to reduce workers' exposure to the dust. METHODS Assessment of indium dust in the workplace air by multipoint area sampling and personal breathing zone sampling was conducted twice in 2004 and 2008. RESULTS In 2004, all recycling processes except for purity analysis wer...

The Engineering and Physical Hazards Branch (EPHB) of the National Institute for Occupational Safety and Health (NIOSH) has been given the lead within NIOSH to study and develop engineering controls and assess their impact on reducing occupational illness. The objective of each of these studies has been to evaluate and document control techniques and to determine their effectiveness in reducing...

When the mountain tunnel projects passing through complex formation with coal, it happened along disaster accidents such as gas outburst, combustion, and explosion. These disasters should seriously threaten safety life of construction personnel affect normal operation construction. Ventilation is most effective means to control gas, fire, dust, heat, other disasters. To study effects different ...

In this study, several exhaust ventilation systems were designed and implemented in a paint manufacturing factory, using ACGIH recommendations. The personal exposure of workers to solvents used in the factory was evaluated to examine the role of implemented standard ventilation system. For this purpose, Toluene and Xylene concentration were monitored before and after the application of ventilat...

The role of road-tunnel ventilation has changed during the last decades. While in former years tunnel ventilation was responsible for providing an acceptable environment for tunnel users passing through the tunnel during normal operation conditions [30], nowadays the support of rescue conditions during a fire is dominating. The introduction of the fire case into the ventilation design resulted ...

Balanced ventilation with heat recovery has strong effects on radon mitigation and energy saving in residential buildings. This new technology enables improvement of both indoor air quality and energy efficiency without sacrificing either. Reducing radon by means of forced ventilation requires an increase in outdoor supplied air (i.e. ventilation rate), which in turn can increase energy use. En...

This report evaluates residential ventilation systems for the U.S. Environmental Protection Agency's (EPA's) ENERGY STAR ® Homes program and recommends mechanical ventilation strategies for new, low-infiltration, energy-efficient, single-family, ENERGY STAR production (site-built tract) homes in four climates: cold, mixed (cold and hot), hot humid, and hot arid. Our group in the Energy Analysis...

There is a need for robust and accurate techniques for the measurement of ammonia (NH3) and other atmospheric pollutant emissions from poultry production facilities. Reasonable estimates of NH3 emission rate (ER) from poultry facilities are needed to guide discussions about the industry's impact on local and regional air quality. The design of these facilities features numerous emission points ...