in this paper, overall heat transfer coefficient and friction factor of water based γ-al2o3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. for better dispersion of γ-al2o3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kw and frequency of 35 khz) were implemented. the stabi...

nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.this article aims to investigate the overall and convection heat transfer coefficient and nusselt number of al2o3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...

Geothermal Heat Pumps, or Ground Source Heat Pumps (GSHP), are systems combining a heat pump with a ground heat exchanger (closed loop systems), or fed by ground water from a well (open loop systems). They use the earth as a heat source when operating in heating mode, with a fluid (usually water or a water-antifreeze-mixture) as the media transferring the heat from the earth to the evaporator o...

For ground-source heat pump (GSHP) installations, it is important to predict the thermal performance and economic feasibility prior to the introduction of the system. Numerical modelling can be used as an analytical method to accurately predict the thermal performance of such system. It is desirable that the modelling to incorporate seasonal variation during long period of operation, which woul...

In present work, comparison of three different tube bundles for particular heat exchanger is proposed. Three types are smooth, micro finned and corrugated tubes. Heat exchanger will be designed with smooth tube bundle and simulated. Micro fin and corrugation over tube is applied separately for same heat exchanger in feasible size and simulated for performance. Besides, comparison is done with h...

Heat exchangers are one of the most important devices of mechanical systems in modernsociety. Most industrial processes involve the transfer of heat and more often they requirethe heat transfer process to be controlled. A heat exchanger is the heat exchanged betweentwo media, one being cold and the other being hot. There are different types of heatexchanger, but the type which is widely used in...

Ground Source Heat Pumps (GSHP) are high efficient HVAC equipment that provide heating and cooling for buildings. The high initial cost of drilling boreholes is one of the main reasons that hinder the widespread application of GSHP. It is very important to develop proper design methods to predict and evaluate the performance of the Ground Heat Exchanger (GHE) throughout its entire life span. In...

This two-part study explores the development and thermal performance of a coiled-tube heat exchanger for hydrogen fuel cell storage systems utilizing High-Pressure Metal Hydride (HPMH). The primary purpose of this heat exchanger is to tackle the large amounts of heat released from the exothermic hydriding reaction that occurs when the hydrogen is charged into the storage vessel and is absorbed ...

The reduction of SO2 and PM for marine engines was investigated using the electrostatic precipitator (ESP) with the heat exchanger. The experiments were carried out to reduce SO2 due to condensation of water in the exhausted gas. The experimental system consists of the diesel engine, the heat exchanger and the ESP. The exhausted gas at 180 o C of the temperature is cooled to 20 o C, and generat...