Studies have proved that increasing polymer matrices by carbon nanotubes to form structural reinforcement and electrical conductivity have significantly improved mechanical and electrical properties at very low carbon nanotubes loading. In other words, increasing polymer matrices by carbon nanotubes to form structural reinforcement can reduce friction coefficient and enhance anti-wear property....

Selective laser sintering (SLS) has been investigated for the production of bioactive implants and tissue scaffolds using composites of high-density polyethylene (HDPE) reinforced with hydroxyapatite (HA) with the aim of achieving the rapid manufacturing of customized implants. Single-layer and multilayer block specimens made of HA–HDPE composites with 30 and 40 vol % HA were sintered successfu...

To recycle post-consumer HDPE contaminated with waste lubricating oils, companies include prior washing and drying in the process. This consumes large amounts of water and energy, generates significant effluent requiring treatment. This study assesses lubricating oil influence on HDPE properties to evaluate the feasibility of its direct mechanical recycling without washing. The current lubricat...

Plastics occupy wide place in the applications of automotive, electronics and house goods. Especially reinforced plastics become popular because of their high strength besides their advantages of low weight and easy manufacturability. In this study, mechanical and morphological properties of polypropylene (PP) and high density polyethylene (HDPE) matrix composites reinforced with surface modifi...

Hospital-acquired infections pose both a major risk to patient wellbeing and an economic burden on global healthcare systems, with the problem compounded by the emergence of multidrug resistant and biocide tolerant bacterial pathogens. Many inanimate surfaces can act as a reservoir for infection, and adequate disinfection is difficult to achieve and requires direct intervention. In this study w...

The objective of this work is to study the effect addition compatibilizing agent poly(ethylene-alt-maleic anhydride) (HDPE-alt-MAH) on mechanical properties and morphology HDPE/PA12 blends. amounts compatibilizer used were 0, 2, 3 wt% blends manufactured in three ratios, namely: 75/25, 50/50, 25/75. It was observed that with 2 HDPE-alt-MAH presented best performance. As proportion PA12 blend in...

An essential characteristic for high performance inherently hydrophobic membranes such as microporous high density polyethylene (HDPE) membranes is to have a hydrophilic surface. In this project, wet chemical functionalization as a facile and effective method was developed to give a hydrophilic property to HDPE membranes using polar functional groups. KClO3, K2Cr2O7 and KMnO4 were selected as o...

Thermal degradation of waste plastics in an inert atmosphere has been regarded as a productive method, because this process can convert waste plastics into hydrocarbons that can be used either as fuels or as a source of chemicals. In this work, waste high-density polyethylene (HDPE) plastic was chosen as the material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse was...

This paper describes the migration of four commonly found volatile organic compounds (VOCs) in landfill leachates e.g., benzene, toluene, ethylbenzene, and xylenes through 1.5mm thick high density polyethylene (HDPE) geomembranes. Diffusion and sorption tests were conducted at room temperature (i.e., 22C) on both unaged and 13-month aged geomembrane samples. Ageing of geomembrane was carried ou...

In this research, on the basis of the control of electrostatic charge, a laboratory-scale triboelectrostatic separation for separating polypropylene (PP) and acrylonitrile-butadiene-styrene (ABS) in seaweed-drying net frame plastic wastes has been carried out. High density polyethylene (HDPE) in a charger material selection tests using a vertical-reciprocation system was found to be the most ef...