To ensure good thermal performance is delivered consistently and at scale, there is a need to measure and understand the asbuilt heat loss of dwellings. Co-heating is a steady state, linear regression method, used to measure whole building heat transfer coefficients. This paper assesses the uncertainties in such outdoor, in situ, measurements due to the presence and treatment of solar gains. Un...

Multiple loop heat pipes which have two evaporators and two condensers in one loop are a kind of active heat transfer device. Since they have two evaporators and two condensers, the operating mode also becomes multiple. This work discusses the cases that multiple loop heat pipes were operated with one condenser at high temperature and the other at low temperature. To avoid the high temperature ...

Miniature heat pipe (MHP) with woven-wired wick was used to cool the CPU of a notebook PC. The pipe with circular cross-section was pressed and bent for packaging the MHP on the very limited space of a notebook PC. A cross-sectional area of the pipe is reduced about 30% when the MHP with 4mm diameter is pressed to 2mm thickness. In this study, a performance test has been performed in order to r...

Pool boiling heat transfer characteristics of Al2O3 -water nanofluids is studied experimentally using a NiCr test wire of 36 standard wire guage diameter. The experimental work mainly concentrated on (1) change of critical heat flux with different volume concentrations of nanofluid and (2) flow visualization of pool boiling using a fixed concentration of nanofluid at different heat flux values....

Nickel plated copper heat spreader acts as a medium to dissipate heat from silicon die towards heat-sink. Electroless nickel plating requires catalytic activation before the nickel can be deposited onto copper. Different catalytic activation techniques such as galvanic initiation and thin nickel-copper electrodeposition have diverse impact on the thermal performance of the heat spreader. Surfac...

This paper first reviews non-traditional heat exchanger geometry, laser welding, practical issues with microchannel heat exchangers, and high effectiveness heat exchangers. Existing microchannel heat exchangers have low material costs, but high manufacturing costs. This paper presents a new expanded microchannel heat exchanger design and accompanying continuous manufacturing technique for poten...

A simple, rapid, heat-stable (70 degrees C) acid-phosphatase test for differentiation of mycobacteria was developed with the alpha-naphthylphosphoric acid-diazonium o-dianisidine color reagent.

In this paper we deal with the aero-heating analysis of a reentry flight demonstrator helpful to the research activities for the design and development of a possible winged Reusable Launch Vehicle. In fact, to reduce risks in the development of next generation reusable launch vehicles, as first step it is suitable to gain deep design knowledge by means of extensive numerical computations, in pa...

Safety issues concerning the use of large lithium-ion (Li-ion) batteries in electrified vehicles are discussed based on the abuse test results of Li-ion cells together with safety devices for cells. The presented abuse tests are: overcharge, short circuit, propane fire test and external heating test (oven). It was found that in a fire, cells with higher state of charge (SOC) gave a higher heat ...