In spite of increased environmental cold stress, heat strain is possible also in a cold environment. The body heat balance depends on three factors: environmental thermal conditions, metabolic heat production and thermal insulation of clothing and other protective garments. As physical exercise may increase metabolic heat production from rest values by ten times or even more, the required therm...

This paper studied the impact of moisture on the correlated characteristics of the condenser bushings oil-paper insulation system. The oil-impregnated paper samples underwent accelerated thermal aging at 130 ̋C after preparation at different initial moisture contents (1%, 3%, 5% and 7%). All the samples were extracted periodically for the measurement of the moisture content, the degree of polym...

Frequency Domain Spectroscopy (FDS) is an effective tool allowing assessing the condition of oil-paper insulation system in power equipment. However, results from these measurements are known to be greatly influenced by various parameters, including insulation aging, moisture content, and insulation geometry/volume, together with environmental condition such as temperature. In this contribution...

Gas Insulated Switchgear (GIS) has been widely used in substations. The insulating medium used in GIS is sulfur hexafluoride (SF6) gas. However, the internal insulation defect existed in GIS would inevitably lead to partial discharge (PD), and cause the composition of SF6 to SOF2, SO2F2 and SO2 and other characteristic component gases. The decomposition phenomenon would greatly reduce the insul...

Corrosion is one of the important factors in equipment failures. Wall thinning can be used to evaluate corrosion conditions. However, most of equipments are coated with insulations in order to elevate the energy efficiency. Pulsed eddy current (PEC) testing technique can be used to measure wall thinning through insulation. But when the insulation outside is wrapped with galvanized steel, PEC si...

Moisture inside the footwear can considerably affect the thermal insulation. In this study with a thermal foot model there was simulated three sweat rates (3, 5 and 10 g/h). Five types of footwear with various insulation levels (dry insulation from 0.19 to 0.50 m2. K/W) were tested. The footwear insulation reduction was calculated for 1.5 hour period. The reduction in insulation was related to ...

T he size, performance and cost of a power electronic system are closely linked to the like parameters of the magnetic components. Since custom power transformers are widely used, transformer design is a frequent design process that has a signifi cant impact on system performance. Yet most high-frequency transformers use less than 25% of the available core window for effi cient current conducti...

BACKGROUND The passage of a lead in tissues and in the cardiovascular system depends on the implantation technique. The structure of the leads, which is a combination of two or more materials, triggers their wear. Breakage of the external pacemaker (PM) lead insulation causes unsealing of the lead and exposure of its internal spaces, which can be the anchor of lead-dependent infective endocardi...

Improving the detection of thermal insulation in buildings –which includes the development of models for heating and ventilation processes and fabric gain could significantly increase building energy efficiency and substantially contribute to reductions in energy consumption and in the carbon footprints of domestic heating systems. Thermal insulation standards are now contractual obligations in...

In this study, a new technical process for hardening wood fiber insulation boards is introduced. During the dry-process, the fibers are usually glued with polymeric-diphenylmethane-diisocyanate (pMDI) and hardened to wood fiber insulation boards using a steam-air mixture. However, the maximum temperature reached in the steam-air process was 100 °C, and it was impossible to use an alternative bi...