fiber metal laminates (fmls) are new composite materials consisting of thin metal layers and high strength composite layers. arall (aramid aluminum laminate) is a family of the fml that consists of thin aluminum sheets along with kevlar/epoxy composite layers. this material has many advantages such as light weight, excellent corrosion, fatigue and impact resistance. since, arall is a new materi...

In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...

When the electrically thin unit cell of a laminated composite material is made of two bianisotropic sheets whose constitutive properties in the thickness direction are decoupled from the constitutive properties in the interfacial planes, the laminated composite material can be homogenized into a material not all of whose constitutive parameters are independent of each other. This non-independen...

In this paper method of initial functions is used for the study of composite laminated beams. The distribution of bending and shear stresses in composite laminated beams are different from beams of small thickness. The equations of two dimensional elasticity have been used for deriving governing equations. The order of the derived equations depends on the stage at which the series representing ...

Aluminum lamination was performed to improve the physical and mechanical properties of several wood-based composite panels. The panels were aluminum-laminated on two faces in a hot press at 689 kPa and 120 °C for 6 min. Four types of wood-based composites were used as cores, and aluminum 3003 alloy sheets were used for face laminations. Polyurethane adhesive ensured bonding strength between the...

In this study in-plane mechanical properties of continuous carbon fibre reinforced thermoplastic polyamide composite manufactured using a Markforged Two 3D printing system was evaluated and compared against predicted values from classical laminated-plate theory. Strength, stiffness Poisson’s ratio the specimens were measured tensile testing both in longitudinal transverse direction shear also m...

This study presents the dynamic and buckling analysis of laminated composite thin arch plate frame structures employing Classical Plate Theory with Finite Element Analysis. For this purpose, effects radius curvature, aspect ratio, stacking order such on first ten natural frequencies, mode shapes, critical load, unstable regions are investigated. Besides, two-bay curved structure is In to perfor...

A laminated composite was produced using a thermoplastic prepreg by inserting an interleaved film with the same type of matrix as the prepreg during the lay-up process to improve the low interlaminar properties, which is a known weakness of laminated composites. Carbon fiber fabric (CFF) and polypropylene (PP) were used to manufacture the thermoplastic prepregs. Eight prepregs were used to prod...

a new method for determination of residual stresses in the bottom layers of laminated composites is developed. in this method the residual stresses are determined by performing a consecutive drilling of laminated composites in the center of the rosette and recording the strains after drilling each layer. the depth of the hole in each step is equal to the thickness of each layer and the maximum ...