A composite microstructure in fiber Bragg grating (FBG) with film deposition for hydrogen detection is presented. Through ablated to FBG cladding by a femtosecond laser, straight-trenches and spiral micro-pits are formed. A Pd-Ag film is sputtered on the surface of the laser processed FBG single mode fiber, and acts as hydrogen sensing transducer. The demonstrated experimental outcomes show tha...

Efficient repetitive passive Q switching of a cladding-pumped Er-Yb fiber laser has been demonstrated by use of an external-cavity configuration containing a Co(2+): ZnS crystal as a saturable absorber. Energies of as much as 60muJ in pulses of durations as short as 3.5 ns (FWHM), corresponding to a peak power of >10kW, have been generated, and the maximum slope efficiency with respect to the a...

We report the fabrication and operation of a Cr:ZnSe buried channel waveguide laser operating at 2500 nm with a linewidth of 10 nm and a maximum power output of 1.7 W. Ultrafast laser inscription is used to fabricate the depressed cladding waveguide in a polycrystalline Cr:ZnSe sample. A thermal model is developed and predicts performance degradation at higher pump levels due to thermal quenchi...

fiber with a cladding index of refraction larger than that f the core is an index antiguiding (IAG) fiber. In such a ber total internal reflection at the core–cladding interace does not take place. Light generated in the core of the ber can leak out into the cladding of an IAG fiber, though t experiences some guiding by grazing angle reflection. here is some loss on each reflection, but if ther...

Original scientific paper In this work, TiC cladded layer has been produced by laser scanning over the preplaced TiC powder on aluminium substrate, using a pulse Nd:YAG laser. Depending on the effective energy density at the specimen surface, TiC was deposited or partially dispersed into the melted aluminium at the specimen surface. Microstructure was evaluated using optical microscopy and SEM/...

We report on Q-switched waveguide lasers on the graphene-based crystalline Y-branch platform. By applying direct femtosecond laser writing of Nd:YAG laser crystal, a surface waveguide splitter with Y-branch geometry has been fabricated with depressed cladding configuration. The Q-switched lasing operation at 1064 nm is achieved in transmission mode, by attaching a two-layer graphene on the reso...

Microfluidic dye lasers (MDL) have recently emerged as promising candidates to facilitate the fusion of optics and fluidics at the microscale. Their primary advantage over gas or solid state lasers is the inherent wavelength tunabililty which can be achieved by changing the type of dye used, the dye concentration, or the host solution. Here, we report on the design and characterization of a MDL...

We report on the single-step fabrication of stressed optical waveguides with tubular depressed-refractive-index cladding in phosphate glasses by the use of focused femtosecond hollow laser beams. Tubelike low index regions appear under direct exposure due to material rarefaction following expansion. Strained compacted zones emerged in domains neighboring the tubular track of lower refractive in...

A self-organized In0.53Ga0.47As/(In0.53Ga0.47As)2(In0.44Al0.56As)2 quantum wire (QWR) laser was grown on a (775)B InP substrate by molecular beam epitaxy (MBE). Well lattice-matched and flat cladding layers were grown at a rather high temperature (595 C). Lateral confinement potential was induced by a nano-meter scale interface corrugation of InGaAs/(InGaAs)2(InAlAs)2 with an amplitude of 2 nm ...

We observed residual stress relaxation by CO(2) laser irradiation in the cores of optical fibers by direct stress measurement. It was demonstrated that the mechanical stress was fully relaxed by CO(2) laser irradiation and that the remaining stress in the core was thermal stress that was due to a mismatch of the thermal expansion coefficients of the fiber core and cladding. The net core stresse...