One of the most dramatic causes of damage of structures during earthquakes has been the development of liquefaction in saturated cohesionless deposits. These deposits have tendency to densify when subjected to earthquake loading. However, when saturated, the tendency to densify causes the excess pore water pressure to increase. This, in turn, results in the effective stress of soil to decrease....

Hydrothermal liquefaction of algae biomass is a promising technology for the production of sustainable biofuels, but the non-oil, aqueous co-product of the process has only been examined to a limited extent. The aqueous phase from liquefaction of the alga Nannochloropsis oculata (AqAl) was used to make growth media for model heterotrophic microorganisms Escherichia coli, Pseudomonas putida, and...

Catalytic liquefaction of (Municipal sewage sludge) MSS over transition metal catalysts in ethanol-water co-solvent (EWCS) was investigated. The effect of operating parameters like temperature, holding time, and ethanol-water ratio was discussed. CuSO4 was selected as the most efficient catalyst. The highest biocrude yield (47.45%) and liquefaction conversion (97.74%) was both obtained at the s...

during the last years the total cost of lng technology has decreased significantly due to improvements of the liquefaction process. however, many liquefaction plants that are still in operation use a three-cascade refrigeration system. in this paper, an advanced exergetic analysis is applied to better understand the operation of a three-cascade refrigeration system for liquefaction of natural g...

due to its critical impact and significant destructive nature during and after seismic events, soil liquefaction and liquefactioninduced lateral ground spreading have been increasingly important topics in the geotechnical earthquake engineering field during the past four decades. the aim of this research is to develop an empirical model for the assessment of liquefaction-induced lateral ground ...

Abstract Rubber-soil mixtures are known to have mechanical properties that enable their use in backfills, road construction or geotechnical seismic isolation systems. The complexity of these comes from adding soft (i.e. rubber) particles increases the number particle consider when studying macroscopic behaviour. distinction between sand-like and rubber-like behaviour is normally presented relat...

Deformation of quay walls is one of the main sources of damage to port facility while liquefaction of backfill and base soil of the wall are the main reasons for failures of quay walls. During earthquakes, the most susceptible materials for liquefaction in seashore regions are loose saturated sand. In this study, effects of enhancing the wall width and the soil improvement on the behavior of gr...

with high energy density, which makes it useful for storage and transportation over long distances from the gas fields to the consumers. LNG is recovered from natural gas in largescale liquefaction plants. Process automation is a key issue in LNG plants to ensure cost efficient plant operation and high product quality. Process analyzer deliver important data therefore. Siemens Sensors & Communi...

© Springer International Publishing Switzerland 2015 K.-T. Chau and J. Zhao (eds.), Bifurcation and Degradation of Geomaterials in the New Millennium, Springer Series in Geomechanics and Geoengineering, DOI 10.1007/978-3-319-13506-9_38 Abstract Micromechanical change in packing structures can provide significant insights to better understand the cyclic mobility and post-liquefaction behaviors o...