On the basis of experimental studies, approximate contribution various hardening mechanisms to yield point low-carbon and low-alloy steels is estimated. It has been established that for hot-rolled (St.3sp St5ps), solid-solution grain-boundary (54.0% 29.0, %) make greatest point. The predominant strengthening mechanism steel 10HNDP solid solution, a high proportion which in this explained by res...

One of the primary reasons for the development of base metal alloys for dental applications has been the escalating cost of gold throughout the 20th century. In addition to providing lower cost alternatives, these nonprecious alloys were also found to provide better mechanical properties and aesthetics for some oral applications. Additionally, certain base metal alloy systems are preferred beca...

The influence of precipitation of intermetallics on changes in Young’s modulus of nickel and zirconium base alloys has been discussed in this paper. This study indicates that the change in the modulus due to thermal ageing in these alloys is essentially governed by the change in the modulus of the matrix due to removal of precipitation forming elements. 1.0 Introduction Mechanical properties in...

The present research was designed to evaluate an ultrasonic technique for measuring the drawability of low carbon steel sheets nondestructively. This technique, which uses electro magnetic acoustic transducers (EMAT's) is embodied in a fully automatic ultrasonic device called Ultra-Form, which was developed at Iowa State University (by the Center For Nondestructive Evaluation) in 1990. EMAT tra...

the term nanosteels is called to some special steels consisting of nanosize phases (i.e. ferrite, cementite, and austenite), grains, and carbides (e.g. vanadium and m2c) produced by nanotechnology. it is proof that exotic physical, mechanical, and magnetic properties can be obtained from nanostructured steels. fabrication methods of nanostructure steels can be divided into two main categories, ...

A need t o find a suitable replacement for cadmium electroplated coatings on mediumto highstrength steels has accelerated the development of economically viable alternatives. This edited version of a presentation at the 30th annual AerospaceIAirline Plating & Metal Finishing Forum examines the development of Australia's Defence Science and Technology Organisation's (DSTO) zinc-nickel electropla...