The simultaneous decomplexation of Cu-EDTA and electrodeposition recovery of Cu(2+) ions was attempted in a photoelectrocatalytic (PEC) system using TiO2/Ti as the anode and stainless steel as the cathode. At a current density of 0.5 mA/cm(2), removal efficiencies of 0.05 mM Cu-EDTA by photocatalysis, electrooxidation, and PEC processes were determined to be 15, 43, and 72% at 3 h, respectively...

A significant quantum of crude oil is trapped in reservoirs and often unrecoverable by conventional oil recovery methods. Further downstream, the petroleum industry is facing challenges to remove sulfur, metal, nitrogen as well as undesirable organic compounds from the crude. Conventional secondary recovery methods such as water and gas injections helped to increase the productivity of the well...

Generally, trace precious metals remaining in wastewaters generated from the refining process of precious metals are not recovered, due to a relatively high processing cost as well as various technical problems. Recovery of precious metals from wastewaters is very important for the conservation of resources and the protection of environment. However, wastewaters containing a large amount of amm...

We demonstrate here an alternative scheme for C(1) coupling by way of methane bromination, followed by concurrent bromomethane condensation and quantitative HBr neutralization; regeneration of the metal oxide with O(2) with recovery of Br(2) completes the cycle.

Synechococcus sp. PCC 7942 has the ability to grow in mass quantity under ideal conditions; such an ability provides usable biomass at a minimal effort. Using lyophilized biomass grown under normal conditions, Synechococcus was tested for its potential to bind metal ions from solution. Batch experiments have determined the optimum binding pH, time dependency, and metal binding capacities for co...

The present paper put forth the isolation and complete characterization of three bacterial isolates from different sites of East Calcutta Wetland (ECW). These isolates show tolerance to heavy metals like Ag, Al, Cu, Cr, Co, Ni, Pb and were found to be efficient metal accumulators as evident from Energy Dispersive X Ray Fluorescence (EDXRF) analysis and Transmission Electron Microscopy (TEM). Be...

Biosorption of heavy metals by various types of non-living (microbial) biomass appears as a very cost-effective new alternative for decontamination of metal bearing effluents. The understanding of metal biosorption mechanisms has progressed to the point where the process is being readied for scale up and field applications. Packed bed sorption columns is perhaps the most efficient equipment for...

This report presents the results of PRCs waste audit study for the metal finishing industry. The study was conducted to identify opportunities for waste reduction available to the metal finishing industry and to develop a generic audit protocol that can be used by metal finishers to assess their own waste reduction opportunities. The study emphasized technologies available to smalland medium-si...

Deep eutectic solvents show interesting prospects as more sustainable alternatives for metal separation and recovery.