The variation of circular microstrip antenna, a Sectoral microstrip antenna is discussed. The detail analysis to study the effects of antenna parameters like, feed point location and the substrate thickness for Sectoral angle increasing from 270 to 340 on the patch first four resonant modes is presented. The variation in angle tunes the spacing between three patch resonant modes which yields op...

The increasing demand in portable devices with wireless connectivity provides a challenge to design a RF front antenna. Microstrip patch antennas are widely used because they are of light weight, compact, easy to integrate. However the serious problem of patch antenna is their narrow band due to surface losses and large size of patch for better performance. So for the antenna miniaturization an...

The modern mobile communication systems requires high gain, large bandwidth and minimal size antenna’s that are capable of providing better performance over a wide range of frequency spectrum.This paper presents the design of microstrip rectangular patch antenna with center frequency at 1.176GHz for IRNSS application. The array of four by one (1x4) patch array microstrip rectangular antenna wit...

In this paper the design, fabrication, and testing of a miniaturized rectangular microstrip patch antenna loaded with DNG metamaterials is reported. The metamaterial is composed of two nested spiral strips and a single straight strip which are etched on two sides of a 5.7 mm×5.7 mm Rogers RT/duroid 5880 with 0.5 mm thickness and dielectric constant of 2.2. Two units of this structure as a doubl...

This article describes the design of single microstrip rectangular patch antenna and 1x1 microstrip rectangular patch antenna arrays operating at 2.4 GHz. Simulation result shows that 5.199 dB and 7.84 dB gain can achieved at frequency 2.4 GHz. Also simulation result show that the return loss is 18.809 at 2.360 GHz in 1x1 microstrip antenna array and current distribution and 3D radiation patter...

In this paper describe the different feeding technique for wireless microstrip antenna, which are microstrip line feed, coaxial plane feed, proximity coupled feed and aperture couple feed. Microstrip line and coaxial probe feeds are contacting scheme, in which RF power directly to the radiating patch. Proximity and Aperture coupled feeds are non contacting schemes ,in which electromagnetic fiel...

The single-feed design of compact microstrip patch antenna with a rectangular ring slot has been demonstrated and results are presented. Simply by inserting a narrow slot of proper length and width on the patch surface, a bandwidth of 330 MHz (9.04 %) with a gain of 2.93 dB is achieved. Results also indicate that, at fixed operating frequency, the proposed design has good omni-directional radia...

A single-feed low-profile and easy to fabricate circularly polarized microstrip patch antenna has been developed for GPS applications. For dual frequency operation, four slots are etched near edges of the patch and a crossed slot etched in the center for generating circular polarization. In order to reducing the frequency ratio of two frequency bands of the antenna, the patch is loaded by four ...

This paper proposes the rectangular microstrip patch antenna suitable to operate in different frequency bands. The rectangular microstrip patch antenna is designed and simulated using IE3D simulation software. The result obtained shows that the designed antenna is suitable for operation in four different frequency bands with bandwidth of 6.90%, 2.33%, 12.02% and 2.74% .The resonating behavior i...

In this paper, S-shape microstrip patch antenna is investigated for wideband operation using circuit theory concept based on modal expansion cavity model. It is found that the antenna resonates at 2.62 GHz. The bandwidth of the S-shape microstrip patch antenna 21.62 % (theoretical) and 20.49% (simulated). The theoretical results are compared with IE3D simulation as well as reported experimental...