The complexity of wireless communication integrated circuits is increasing day by day due to the trend of multifunction and multistandard support. This has not only increased the production cost of these RFICs but the testing cost is also increased significantly, as much advanced test equipments and instruments are needed to carry out the sophisticated performance tests. To avoid this higher co...

We conducted a numerical study on mixing in a barrier embedded micromixer with an emphasis on the effect of periodic and aperiodic sequences of mixing protocols on mixing performance. A mapping method was employed to investigate mixing in various sequences, enabling us to qualitatively observe the progress of mixing and also to quantify both the rate and the final state of mixing. First, we int...

This paper demonstrates the low voltage operation of a doubly balanced Gilbert mixer fabricated in a 0.8m CMOS process and operating as both a down-converter and an upconverter. As a down-converter with an RF input of 1.9 GHz, the mixer has a single sideband noise figure as low as 7.8 dB and achieved down-conversion gain for supply voltages as low as 1.8 V. As an up-converter, the mixer demonst...

We present the design of ALMA Band 5 sideband separation mixer based on Niobium superconducting SIS junctions and first experimental results for the double side band mixer. In this mixer the LO injection circuitry is integrated on the mixer substrate using a microstrip line directional coupler with slot-line branches in the ground plane. The isolated port of the LO coupler is terminated by a wi...

A new analytical model for high-frequency noise in RF active CMOS mixers such as single-balanced and doublebalanced architectures is presented. The analysis includes the contribution of non-white gate-induced noise at the output as well as the spot noise figure (NF) of the RF CMOS mixer, while accounting for the non-zero correlation between the gateinduced noise and the channel thermal noise. T...

In this paper, a doubly balanced V-band star mixer has been designed following the design method developed for I-Q modulators applications. The mixer has been designed using a commercial GaAs pseudomorphic HEMT process library. The mixer exhibits RF bandwidth over 45-65 GHz with local oscillator isolation better than 30 dB, and achieved a typical conversion loss of 9 dB. The IF modulation bandw...

Effective mixing is vitally important to many microfluidic devices in the areas of biotechnical industries, analytic chemistry and medical industries. However, most micro-mixers require complicated fabrication procedures, possibly inappropriate for practical microfluidic utilization. These mixers generally operate under low Reynolds-number conditions, causing a relatively long reaction time in ...

This paper describes an 84-116 GHz Nb/Al-oxide/Nb SIS mixer with multi-octave IF bandwidth and quantum-limited sensitivity. The mixer can be integrated with a three-stage 4-12 GHz HFET preamplifier or fitted with a coaxial connector for operation with an external isolator and IF amplifier. An 84-116 GHz receiver using the mixer with an integrated 4-12 GHz HFET preamplifier has a double sideband...

We developed a confocal microscopic method for a quantitative evaluation of the mixing performance of a three-dimensional microfluidic mixer. We fabricated a microfluidic baker's transformation (MBT) mixer as a three-dimensional passive-type mixer for the efficient mixing of solutions. Although the MBT mixer is one type of ideal mixers, it is hard to evaluate its mixing performance, since the...