We have investigated the use of aluminum based amorphous metallic glass as the anode in lithium ion rechargeable batteries. Amorphous metallic glasses have no long-range ordered microstructure; the atoms are less closely packed compared to the crystalline alloys of the same compositions; they usually have higher ionic conductivity than crystalline materials, which make rapid lithium diffusion p...

hydroxyapatite (ha) nano-rods with uniform morphology and controllable size have been successfully synthesized in the presence of cationic and non-ionic surfactants by a hydrothermal method. (nh4) 2hpo4 and ca(no 3)2.4h2o were used as the phosphorus and calcium sources, respectively. the composition of synthesized powders was characterized using x-ray diffraction, and fourier transform infrared...

In the present study, the hardness and electrical properties of copper based composite prepared by hot pressing of mechanically alloyed powders were predicted using Artificial Neural Network (ANN) approach. Milling time (t, h), particles size of mechanically alloyed powders (d, nm), dislocation density (ρ, m) and compressive yield stress (σ0.2, MPa) were used as inputs. The ANN model was develo...

Several methods for fabricating a dye sensitized solar cell (DSSC) are introduced for enhancing its photo-chacracterisitics 1 , 2 . The novel method, nano-particle deposition system (NPDS), suggests one of the outstanding ways to be applied in DSSC. NPDS is a novel method to deposit ceramic and metallic powders on substrate at room temperature, by accelelating particles up to supersonic veloc...

Abstract In this project, nano-ZrO2 particles were dispersed in aluminum powder by a Y-shape mixer. The particle size of ZrO2 powder was < 40 nm and the amount of ZrO2 reinforcement varies from 3 to 15%.The mixed powders were compacted .Subsequently the compacted discs were sintered both in the microwave oven and in the conventional muffle furnace .Using microwave –assisted sintering method led...

In this study, wet-chemical process was performed to prepare nano-size hydroxyapatite (HA) powders (≈10 nm) by varying concentration (low, medium and high) of the starting solutions in order to increase the amount of as-dried HA powders with different process conditions. Particle sizes and density were analyzed and differential thermal analysis was used to determine the glass transition (Tg) an...

The purpose of this work is to establish the theoretical foundations for calculating and designing the sublimationcondensation processes in chemical apparatuses which are intended for production of ultrafine powders of crystalline and amorphous materials with controlled fractional composition. Theoretic analysis of the primary processes of nucleation and growth kinetics of the clusters accordin...

NMR signals of 7Li, 23Na, 35C1, 39K , 79Br, 87Rb and 127I have been measured in various alkali and halogen salt powders relative to well defined aqueous solutions. W ith the known shielding constants of some of these solutions the nuclear magnetic shielding constants of the alkali and chlorine nuclei in crystalline powders were evaluated in the atomic reference scale. The theoretical values of ...