In open channel, canals and rivers, a rapid increase in flow depth will induce a positive surge, also called bore or compression wave. The positive surge is a translating hydraulic jump. Herein new experiments were conducted in a large-size rectangular channel to characterise the unsteady turbulent properties, including the coupling between free-surface and velocity fluctuations. Experiments we...

The purpose of this research was to determine the shear strength of a unidirectional carbon-®bre/epoxy composite by means of the 10 o€-axis and 0 Iosipescu specimens subjected to shear. Detailed non-linear ®nite-element computations of these two tests were conducted, taking into account the actual non-linear material behavior of the composite. The tests were compared in terms of stresses and st...

Simulations of the flow of concentrated aggregated colloidal systems, at the particulate level, are used to investigate the distribution of stresses in the shear-thinning regime. It is found that the distribution of shear stress carried by interparticle bonds decays approximately exponentially at large stresses, but with a double-exponential distribution for values of positive stress. The micro...

In this paper the variation of normal and shear stresses along a path defined on the bone-dental implant interface is investigated. In particular, the effects of implant diameter, collar length and slope, body length, and the effects of four different types of external threads on the interfacial stress distribution are studied. The geometry of the bone is digitized from a CT scan of a mandibula...

When loaded in simple shear deformation, polymeric materials may develop so-called normal stresses: stresses perpendicular to the direction of the applied shear. These normal stresses are intrinsically nonlinear: basic symmetry considerations dictate they may only enter at O(γ(2)), with γ the dimensionless shear strain. There is no fundamental restriction on their sign, and normal stresses may ...

Interstitial flow is an important regulator of various cell behaviors both in vitro and in vivo, yet the forces that fluid flow imposes on cells embedded in a 3D extracellular matrix (ECM), and the effects of matrix architecture on those forces, are not well understood. Here, we demonstrate how fiber alignment can affect the shear and pressure forces on the cell and ECM. Using computational flu...

Biomass tensile and shear ultimate failure stresses were measured with the aim of identifying biomass ‘‘weakest mode of failure’’ or ‘‘natural fracture point’’ as a basis for future grinder designs. Switchgrass (Panicum virgatum L.) ultimate stresses were determined for Alamo and Kanlow varieties over ranges in maturity and moisture content. Alamo had greater ultimate tensile stress than Kanlow...

We perform molecular dynamics simulations on a bead-spring model of pure polymer grafted nanoparticles (PGNs) and of a blend of PGNs with a polymer melt to investigate the correlation between PGN design parameters (such as particle core concentration, polymer grafting density, and polymer length) and properties, such as microstructure, particle mobility, and viscous response. Constant strain-ra...

Mud peeling is a common phenomenon whereby horizontal cracks propagate parallel to the surface of a drying clay. Differential stresses then cause the layer of clay above the crack to curl up to form a mud peel. By treating the clay as a poroelastic solid, we analyse the peeling phenomenon and show that it is caused by the gradient in tensile stress at the surface of the clay, analogously to the...

We have shown that leukocytes retract their pseudopods and detach from substrates after exposure to physiological fluid shear stresses ( approximately 1.5 dyn/cm(2)). In inflammation, however, pseudopod projection during spreading and firm adhesion on endothelium is observed even in microvessels with normal blood flow and fluid shear stresses. Thus, we examined mechanisms that may serve to regu...