In this paper, the removal of phenol by using aqueous solution in a low pressure reverse osmosis membrane was investigated. The effect of feed pressure, feed concentration, feed flow rate and feed pH on phenol rejection was investigated. The results showed that feed pH is the most affective parameter on the phenol rejection. Rejection of phenol increased with increasing pH from 2 to 10 under th...

Individual and competitive adsorption studies were carried out to investigate the removal of phenol and nickel ions by adsorption onto multiwalled carbon nanotubes (MWCNTs). The carbon nanotubes were characterized by different techniques such as X-ray diffraction, scanning electron microscopy, thermal analysis and Fourier transformation infrared spectroscopy. The different experimental conditio...

The phenolic compounds are known by their carcinogenicity and high toxicity as well as creating unpleasant taste and odor in water resources. The present study develops a cost-effective technology for the treatment of water contaminated with phenolic compounds, including Phenol (Ph), 2-chlorophenol (2-CP), and 4-chlorophenol (4-CP). So, two sorbents, rice bran ash (RBA) and biomass of brown alg...

phenol and phenol compounds are environmental pollutants present in industrial wastewaters such as, coal tar, oil refineries and petrochemical plants exist. phenol removal from industrial effluent is extremely important in protection of environment. recently phenol biodegradation has been considered. marine bacteria are the most important phenol biodegrader. in this study, the phenol-degrading ...

Phenol-formaldehyde/silica hybrid gel with hydrophobic character, high porosity, and thesmall pore size mean was prepared via sol-gel polymerization under solvent saturated vaporatmosphere and was dried by ambient drying method. The silica sols were prepared based onTetraethoxysilane (TEOS) and Methyltrimethoxysilane (MTES) as hydrophilic and hydrophobicprecursors, respectively. Phenol-formalde...

A simple experimental set-up was used to study the treatability aspect of phenolic wastewater. Three types of systems: i) activated sludge (A.S), ii) granular activated carbon (A.C) and iii) activated sludge plus activated carbon (A.S + A.C) were experimented under different phenol loadings (100, 200 and 300 mg/l) and different flow rates (21.6 and 43.2 l/d) with initial COD concentration 500 m...

Perovskite-like oxides SrCo1-xTixO3-δ (SCTx, x = 0.1, 0.2, 0.4, 0.6) were used as heterogeneous catalysts to activate peroxymonosulfate (PMS) for phenol degradation under a wide pH range, exhibiting more rapid phenol oxidation than Co3O4 and TiO2. The SCT0.4/PMS system produced a high activity at increased initial pH, achieving optimized performance at pH ≥ 7 in terms of total organic carbon re...

In order to improve adsorption capacity of granular activated carbon (GAC), potassium permanganate was used to react with GAC to change the surface properties and improve the adsorption capacity of GAC. By batch experiments, improvement of adsorption capacity of potassium permanganate modified GAC (GACM) was studied. The influence of adsorption time, temperature, ratio of phenol with GAC/GACM, ...