Flame photometry has many applications, and in the clinical field its use in the estimation of serum sodium and potassium is now well established. Difficulties have been encountered in the estimation of serum calcium by flame photometry, since the emission spectrum of calcium is relatively weak and is subject to interference by the presence of other ions, e.g., sodium. Although many methods hav...

A field-portable photometer for potassium determination with disposable sensors has been developed. It can be applied to routine water and beverage analysis. The disposable sensor is based on ionophore-chromoionophore chemistry. A colour change in the sensing film is detected by measuring the transmitted intensity with a solid state photodetector. Optical excitation at 660 nm is emitted by a li...

We examined the measurement error in inhaled and exhaled aerosol concentration resulting from the bolus delivery system when small volumes of monodisperse aerosols are inspired to different lung depths. A laser photometer that illuminated approximately 75% of the breathing path cross section recorded low inhaled bolus half-widths (42 ml) and negative deposition values for shallow bolus inhalati...

Fast Pre-amplifier is designed for Semiautomatic twilight photometer, used for aerosol measurements over Kolhapur (16°42′N, 74°14′E). This amplifier is designed and developed by connecting 10 single IC amplifiers in parallel. The efficiency of the system is increased by adopting multiple pre-amplifier configuration which improves signal to noise ratio by factor of 10 and this fact is responsibl...

When cyanide poisoning is treated with a methemoglobin-forming agent, oxidative metabolism is protected at the expense of the oxygen capacity of the blood. The affinity of methemoglobin for CN- is high enough to compete with cytochrome oxidase, which protects the latter from becoming blocked, but all hemoglobin used for this purpose is lost for the transport of oxygen. Therefore, the fractions ...

Aims. Instrument simulators are becoming ever more useful for planning and analysing large astronomy survey data. In this paper we present a simulator for the Herschel-SPIRE photometer. We describe the models it uses and the form of the input and output data. Methods. The SPIRE photometer simulator is a software package which uses theoretical models, along with flight model test data, to perfor...

We compared the Hitachi 705 E sodium/potassium electrode system with the Radiometer flame photometer for measuring concentrations of sodium and potassium ions in serum and plasma. Our data show that the Hitachi results are slightly but significantly (less than 0.001) lower than the flame photometer results: Na+ 1.33 mmol/L for serum and 2.24 mmol/L for plasma; K+ 0.062 mmol/L for serum and 0.08...

Trace analysis of liquid samples has wide applications in life science and environmental monitor. In this paper, a compact and low-cost photometer based on metal-waveguide-capillary (MWC) was developed for ultra-sensitive absorbance detection. The optical-path can be greatly enhanced and much longer than the physical length of MWC, because the light scattered by the rippled and smooth metal sid...

In this paper an input-output transfer function analysis based on the frequencyresponse of a photometer circuit based on operational amplifier (op amp) is carried out. Opamps are universally used in monitoring photodetectors and there are a variety of amplifierconnections for this purpose. However, the electronic circuits that are usually used to carryout the signal treatment in photometer circ...

The amount of light scattered by airborne particles inside an aerosol photometer will vary not only with the mass concentration, but also with particle properties such as size, shape, and composition. This study conducted controlled experiments to compare the measurements of a real-time photometer, the SidePak AM510 monitor (SidePak), with gravimetric mass. PM sources tested were outdoor aeroso...