Weld joint penetration control is a basic research topic in the welding research community. The authors propose using an innovative plasma arc welding process referred to as the quasi-keyhole process to achieve less application-dependent weld joint penetration sensing and control. To control the quasi-keyhole process, the peak current and keyhole sustaining current are selected as the control v...

In order to study the effect of spot welding parameters such as welding force, welding time and welding current intensity on nugget formation and its size in resistance spot welding process of CR3 low carbon steel sheets using ANSYS commercial software package. A 2D axisymmetric electro-thermo-mechanical finite element (FE) model is developed to simulate the nugget forming process and to predic...

The aim of this paper is to achieve thespot welding sequence for minimum distortion of a sheet metal assembly and to optimise the parameters of welding which insures minimum distortion for the optimised sequence. The distortion of the assembly involving number of spot welds is different for different sequences of welding The assembly consists of sheet metal components which are joined by using ...

Ultrasonic complex vibration welding of same and different metal specimens and structures of the welded area are studied using several complex vibration welding systems, scanning and transmission electron microscopes (SEM and TEM). Ultrasonic welding can weld various metal directly using vibration and static clamping pressure. The welding area is limited very narrow layer and can weld different...

Although various computer-aided fixture design (CAFD) systems have been developed to assist the designer during the various stages of fixture design, most of previous computer aided fixture design research has mainly concentrated on machining fixtures rather than welding fixtures. The development of complicated computer aided welding fixture design (CAWFD) system has received much less attentio...

It is well khown that welding arcs emit intense ultraviolet radiation and those who conduct welding operations or work nearby are exposed to the radiation and often suffer injuries. It is desirable to evaluate the ultraviolet radiation from the viewpoint of industrial health. But, there have been few quantitative studies of this radiation. We determined the ultraviolet effective irradiance, bas...

A new spectral processing technique designed for application in the on-line detection and classification of arc-welding defects is presented in this paper. A noninvasive fiber sensor embedded within a TIG torch collects the plasma radiation originated during the welding process. The spectral information is then processed in two consecutive stages. A compression algorithm is first applied to the...

Background: Iron and steel based industries use welding as an integral process. About two percent of the working population is engaged in some type of welding. Welding fumes consist of a wide range of complex metal oxide particles which can be deposited in all regions of the respiratory tract. Thus, welding process seems to be simple but its health implications are complex. Materials and method...

The distortion of laser welded titanium plates was assessed for different operating conditions of the laser welding device, and with different welding parameters (in terms of weld point and prewelding). In this study, Nd : YAG laser welding device was used to join the titanium plates. The results showed that distortion increased stepwise after each welding point along the welding zone (one-side...

Purpose: of this paper is to present the recent possibility of evolutionary optimization method application to predicting the proper welding parameters in the weld process. The objective of the welding simulation is to study the temperature generated during the welding process and to investigate residual stresses in the component after the welding. Such results give the possibility to determine...