The compressive creep and the recovery of commercially available composites, 2 kinds for posterior and 2 kinds for anterior use, in water were examined. In posterior composites, creep strain after 500h at a stress level of 8.3 kgf/mm2 was significantly small (within 1%). The results of the compressive creep test showed that posterior composites would be resistant to occlusal stress. Creep strai...

For the first time, we considered Mn oxide/C60 composites as water-oxidizing catalysts. The composites were synthesized by easy and simple procedures, and characterized by some methods. The water-oxidizing activities of these composites were also measured in the presence of cerium(iv) ammonium nitrate. We found that the nanolayered Mn oxide/C60 composites show promising activity toward water ox...

Various amounts of multiwalled carbon nanotubes [MWNTs] were embedded into polyetherimide [PEI] to form PEI/MWNT composites, and their dielectric properties were measured at 1 MHz. The Lichtenecker mixing rule was used to find a reasonable dielectric constant for the MWNTs used in this study. The dielectric constants of the developed composites were significantly increased, and the loss tangent...

In this work, the redmud reinforced polypropylene composites were fabricated by compression molding setup. The effects of the redmud content on the mechanical, melting and crystalline behavior of the composites was investigated. The melting and crystalline behavior of the composites were investigated using Digital Scanning Calorimeter. The test results show that hardness of the composites incre...

in this research, old magazine (omg) recycled fiber and glass fiber (gf) were mixed at different levels of 10%, 20%, 30% and 40% (based on weight) with two levels of 50% and 60% polypropylene (pp) and then the produced composites evaluated compared to those from net polypropylene. on the basis of obtained results from normalization equations in different treatments done, two treatments has been...

Short randomly oriented banana and sisal hybrid fibre reinforced polyester composites, banana/polyester composites and sisal/polyester composites were fabricated at different fibre loading say, 0.20 to 0.50 Vf. Composites were prepared by varying the relative volume fraction of the two fibres at each fibre loading. When the fibre loading was increased; tensile, flexural and impact properties in...

Activated carbon fiber/carbon aerogel (ACF/CA) composites were fabricated by gelling a mixture of ACF and resorcinol and furfural, followed by supercritical drying of the mixture in isopropanol. The product then went through carbonization in a nitrogen atmosphere. The fabrication conditions, such as the mass content of R–F, the content of the ACF added, and the gelation temperature, were explor...

AlN/epoxy composites with high thermal conductivity were successfully prepared by infiltrating epoxy into AlN porous ceramics which were fabricated by gelcasting of foaming method. The microstructure, mechanical, and thermal properties of the resulting composites were investigated. The compressive strengths of the AlN/epoxy composites were enhanced compared with the pure epoxy. The AlN/epoxy co...

Different volume fractions (1.3, 2.6, and 7.6 Vol.%) of carbon nanotubes (CNTs) were dispersed within 8Y-TZP nanopowders. Mixed powder specimens were subsequently processed by spark plasma sintering (SPS) and effects of CNTs on the sintering process of 8Y-TZP/CNT composites was studied. Maintenance of CNTs through the SPS process was confirmed using TEM and Raman Spectroscopy. Studies on the si...

Effects of modifying oil palm mesocarp fibers (OPMF) by methacrylate silane on polylactic acid (PLA)/ polycaprolactone (PCL)/clay/OPMF hybrid composites were investigated. The composites were prepared by a melt blending technique and characterized by dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The silane-treated OPMF hybrid composites showed better tensile strength...