Athi tree leaves (Ficus relegiosa) powder carbon was used as an adsorbent for the removal of DNB-106 dye from an aqueous solution. The studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorption dose, and pH to assess the potentiality of Athi leaves powder carbon (ATC) for the removal of DNB-106 dye from wastewater. A greater percentage o...

The organic dyes directly pollute the soil, water, plants and all living systems in the environment. In the present investigation, adsorption of brilliant green dye on silica from aqueous solution was studied. The dye adsorption mechanism was studied on the basic surface of silica. The adsorption parameters were optimized to maximum adsorption. The adsorption mechanism of brilliant green on sil...

The purpose of this study was to investigate the effect of the structure of reactive dye on cotton ink-jet printing. Cotton fabric was printed upon with three commercial cellulosic reactive dyes which are based on the similar chromophore and possess different numbers of reactive and anionic groups. Colour yield and absorbed dye fixation of the printed cotton were evaluated at various pHs. The i...

The dye of wastewater is a major environmental problem. Chemical and biological treatment of wastewaters containing dye is difficult due to the low level of adsorption and chemical stability of dyes. Activated carbon is usually used for adsorption of these materials, but because of high prices and restore problems, researchers trying to find available, low-cost materials with high adsorption. I...

Wastewater effluents from textile industry mainly contain dyes used in the dyeing or printing of textiles yarns or fabrics. A lot of technologies can be adopted for dye removal from wastewaters, including biological treatments based on activated sludge, adsorption on activated carbon, or membrane processes. Nevertheless, none of these methods is performing toward all classes of dyes; treatment ...

Abstract Introduction: Dyes are among the most hazardous chemicals in industrial wastesdue to their toxicity for aquaculture, reduction of light permeability, and in turn development of disorders in photosynthesis process. The current study aimed to investigate the efficiency of coral in removing red reactive 198 from textile dye wastewater was investigated. Materials & Methods: In this e...

An adsorbent called chitosan coated magnetic hydroxyapatite nanoparticles (CS-MHAP) was prepared with the purpose of improvement for the removal of Ni(2+) ions and textile dye by coprecipitation. Structure and properties of CS-MHAP were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and vibrating sample magnetometer ...

ginger waste material (gwm) has been utilized as adsorbent for removal of hazardouspatent blue vf (pbvf) dye from aqueous solution. batch adsorption experiments wereperformed as a function of ph, contact time, dye concentration, adsorbent dose and temperature.the optimum ph required for the maximum adsorption was found to be 2. the experimentalequilibrium adsorption data were tested using langm...

The activated charcoal was used for the removal of alizarin red dye from aqueous solution. Different parameters such as effect of contact time, initial dye concentration and pH were investigated. It was observed from the concentration study that the amount of dye adsorbed per unit mass of the adsorbent increased with increase in dye concentration. The pH study presented that the adsorption of d...

HE EFFECT of acid red 150 dye (AR150) adsorption parameters onto the prepared gelatin/chitosan/laponite based nanocomposites (NC I, II, III and IV) such as dye concentration, contact time, pH, and sorbent amount using ultrasonic energy had been studied. The standard adsorption affinity through the adsorbent suitability was also carried out. The results revealed that high concentrations of AR150...