Nonlinear finite element simulation was once employed to look into the behavior of horizontally curved reinforced concrete deep beams under concentrated load at its mid-span. The study focused on parametric impact span length-to-depth (L/D) and length-to-radius (L/R) ratios. In addition, effect longitudinal spacing shear reinforcement beam has been investigated. considered sixteen specimens. Th...

Short banana fiber reinforced composites have been prepared in laboratory to determine mechanical properties. It has been observed that as soon as the percentage of the banana fiber increases slightly there is a tremendous increase in ultimate tensile strength, % of strain and young modulus of elasticity. Reinforcement of banana fibers in epoxy resin increases stiffness and decreases damping pr...

The main goals of wire electrical discharge machining (WEDM) manufacturers and users are to achieve a better stability and high productivity of the manufacturing process. The investigation on machinability of Aluminium Matrix Composite (AMC) using Wire-cut Electric Discharge Machining (WEDM) machine is constructed. The aim of this project to determine the most optimum machining parameter that w...

This paper proposes an improved approach of summarization for spoken multi-party interaction, in which a multi-layer graph with hidden parameters is constructed. The graph includes utterance-to-utterance relation, utterance-to-parameter weight, and speaker-to-parameter weight. Each utterance and each speaker are represented as a node in the utterance-layer and speaker-layer of the graph respect...

This paper presents a method of analysis for the response of concrete beams reinforced with fibrereinforced-plastic (FRP) tension rods and aramid spirals. Three different kinds of longitudinal reinforcement are adopted; CFRP, AFRP and GFRP. Both under-reinforced and over-reinforced sections are described. It is found that the ratio of neutral axis depth and effective depth can be used as an ind...

Polypropylene Fiber Reinforced Concrete is an embryonic construction material which can be described as a concrete having high mechanical strength, Stiffness and durability. By utilization of Polypropylene fibers in concrete not only optimum utilization of materials is achieved but also the cost reduction is achieved. This paper presents a comprehensive review on various aspects Polypropylene F...

Adding steel braces to reinforced concrete frames is a common way for seismic rehabilitation of these structures. Due to ease of installation and the possibility of creating openings in the braced bays, this method of rehabilitation has been more preferred than using shear walls. In this paper, three experimental specimens including a reinforced concrete frame, a reinforced concrete frame with ...

In order to improve the failure state of over-reinforced beams and enhance their ductility, an innovative reinforcement method was proposed by adding ultrahigh performance concrete (UHPC) layer on top surface beam take advantage high compressive strength UHPC. The numerical simulation used carry out research. validity finite element model verified comparing it with experimental results, effecti...

In recent years many research on composite beams with innovative shear transmission with composite dowels have been conducted and innovative composite constructions have been built. One of the common types of shear connection is the method of rolled girders encased in a concrete slab. The combination of such method and pcb (precast composite beam) technology is called pcb-W (precast composite b...

We compared two sources of behavior variability: decreased levels of reinforcement and reinforcement contingent on variability itself. In Experiment 1, four groups of rats were reinforced for different levels of response-sequence variability: one group was reinforced for low variability, two groups were reinforced for intermediate levels, and one group was reinforced for very high variability. ...