Bogolitsyn K., gusakova m., samsonova n., selivanova n., Pochtovalova a.: Integral indices for quality assessment of pulp and paper mill effluents. Ekológia (Bratislava), vol. 33, no. 1, p. 60–66, 2014. The first part of this investigation studied complex nature of chemical oxygen demand (cod) parameter on local and overall effluents, which were obtained from two pulp and paper mills, located i...

Textile dye wastewaters are characterized by strong colour, salts and other additives, high pH, temperature, chemical oxygen demand (COD) and biodegradable materials. Being aesthetically and environmentally unacceptable, these wastewaters need to be treated before their discharge. Anaerobic bioprocesses have been proposed as being environmentally friendly and relatively cheap; however, when app...

This study evaluated the effectiveness of soils with different textures and thickness to treat BOD, N and P eluted from household septic effluent. The assessments were accomplished by leaching undisturbed soil monoliths of 30, 45 and 60 cm thickness and 25 cm in diameter, representing the four different textural groups and hydraulic loadings recommended by the Kentucky Health Department, with d...

In this study, the electrocoagulation process was evaluated as a pretreatment process for olive mill wastewaters. Aluminium (Al) and iron (Fe) electrodes, several contact times and 0.5, 1 and 2 A currents were used to compare chemical oxygen demand (COD) removal efficiencies for each case. The optimum contact time and current were 45 minutes and 1 A, respectively, which resulted in a COD remova...

In this paper, bioaugmentation was applied to upgrade a full-scale activated sludge system (S2) into a contact oxidation system (S1). Results showed that when chemical oxygen demand (COD) and ammonia nitrogen (NH(4)(+)-N) concentration of the petrochemical wastewater were 320-530 mg/L and 8-25mg/L, respectively, the bioaugmented process (S1) took only 20 days when they were below 80 mg/L and 10...

Four methods for determining substrate recoveries in studies concerned with the partition of substrate between sludge synthesis and respiration were investigated. An energy balance comparing chemical oxygen demand (COD) removed with the summation of oxygen uptake and the COD of the cells produced yielded average recoveries closer to 100% than any of the other three methods tested. The standard ...

This research evaluated the efficiency of combined anaerobic-aerobic processes for the treatment of slaughterhouse wastewater. The anaerobic reactor consists of a 3.95 L Plexiglas column with 60 mm diameter and 140 cm height. The cylindrical particles of polyvinyl chloride with 2 mm diameter and 1250 kg m-3 density packed to 60 cm of column were used as biomass saving material. The d...

Biogas yield of mixtures of cattle slurry and cheese whey, rates of production of methane, removal efficiencies of chemical oxygen demand (COD) and biological oxygen demand (BOD) were investigated at 35 °C. Stable biogas production of 621 l/kg volatile solids at a hydraulic retention time of 42 days in a mixture containing 50% slurry and whey was obtained. The concentration of methane in the bi...

Sulfur-utilizing autotrophic denitrification relies on an inorganic carbon source to reduce the nitrate by producing sulfuric acid as an end product and can be used for the treatment of wastewaters containing high levels of nitrates. In this study, sulfur-denitrifying bacteria were used in anoxic batch tests with sulfur as the electron donor and nitrate as the electron acceptor. Various medium ...

WSPs are widely used in North America, and offer huge potential for other continental climate regions. The standard design and operating protocol is robust even at high latitudes, but may be conservative elsewhere. A simple model based on first-order kinetics for biochemical oxygen demand (BOD) is used to consider some alternative design and operating protocols, using long-term daily climate re...