نتایج جستجو برای: sol gel auto combustion method

تعداد نتایج: 1769607  

Khorsand, H., Rostami, M.,

The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...

G. Mahmoudzadeh M. Zhalechin S. A. Khorrami S. S. Madani Sh. Moradi,

The aim of this study is to evaluate the influence of pH on the synthesis of nanocrystallines cobalt ferrite by combination of sol- gel auto combustion and ultrasonic irradiation methods. Two different fuels, urea and thiourea, along with metal nitrates (oxidant) were used to prepare CoFe2O4 powders. The morphology of the resulting powders was investigated. The powders wer...

In this paper, W-type SrCo2Fe16O27 hexaferrite nanostructures were synthesized by sol-gel auto-combustion method. Effect of annealing temperature on the structural, magnetic and optical properties of these SrCo2Fe16O27 nanostructures was investigated. In order to determine the annealing temperature of samples, the prepared gel was examined by thermo-gravimetric and differential-thermal analyses...

Nanocomposite zinc ferrites were synthesized using glycine-nitrates by sol–gel auto-combustion technique. The influence of calcination temperatures varying from 400 to 900°C on structural and magnetic properties of spinel ZnFe2O4 powders have been investigated. The characterization measurements including X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetomet...

اعلم الهدی, سمیه, بنویدی, نیلوفر, شاهجویی, طاهره, میرکاظمی, سید محمد,

In this research, nickel ferrite nanoparticles were synthesized by sol-gel auto-combustion route, and the effect of calcination temperature on phase constituents, magnetic properties and microstructure of the synthesized nanoparticles was evaluated using X-ray Diffraction (XRD), Vibrating Sample Magnetometer (VSM) and Scanning Electron Microscopy (SEM). XRD results were submitted to quantitativ...

طیب‌طاهر, محبوبه , فربد, منصور, کاظمی‌نژاد, ایرج,

This paper describes the details of synthesizing nano crystalline YBCO superconductor using a sol-gel combustion method and the effect of sol pH and sintering temperature on particle size was investigated. The sintering temperature was chosen 880°C and the samples were annealed at this temperature for 5 hours. The morphology and structure of the nano scale products were characterized by powder ...

Journal: :Journal of Inorganic and Organometallic Polymers and Materials 2023

Abstract The demand for clean water free of pollution has become an urgent priority humanity. Gd 2 Zr O 7 nanoparticles were successfully synthesized via sol–gel auto combustion as a type pyrochlore to be used in the dye phytoremediation using Fenton-like approach. have been prepared auto-combustion strategy. annealing process was performed furnace at 1100 °C h form defect-fluorite structured w...

Journal: :iranian journal of pharmaceutical sciences 0
sedigheh joughehdoust islamic azad university, science and research branch, biomedical engineering faculty and young research club, tehran, iran aliasghar behnamghader material and energy research center, tehran, iran abdollah afshar department of material science and engineering, sharif university of technology, tehran, iran

in this investigation, fluor-hydroxyapatite (fha) film was deposited on a titanium substrate by sol-gel method. triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol solutions were used respectively as p, f and ca precursors. typical apatite structures were obtained for all coatings after dipping and subsequent heat treatment at 550, 700 and 800 ºc, the coating layers were invest...

Journal: :international journal of nano dimension 0
tayseir mohammed abd ellateif chemical engineering department, universiti teknologi petronas, tronoh-31750, perak, malaysia saikat maitra government college of engineering and ceramic technology, kolkata-700010, india

in the present investigation surface modification of silica nanoparticles by alumina was carried out by sol-gel process. fourier transform infrared (ftir) and x-ray fluorescence (xrf) confirmed the synthesis of silica and the surface modification as alumina is anchored to silica surface. field emission scanning electron microscopy (fesem) and transmission electron microscopy (tem) investigation...

Journal: :chemistry of solid materials 2015
m. ali nia asli m. a. rezvani m. oveisi l. abdollahi

transition-metal-substituted  (tms)  polyoxometalates  of  the  general  formula  [siw9m3o39], (where m = first row transition metal), has been synthesized and supported on anatase by sol–gel method under oil-bath condition. the tetrabutylammonium (tba) salts of the keggin-type polyoxotungstates  [siw9m3o39],  (m = vii, crii, mnii,  feii coii  and niii),  proved  to  be  green, reusable,  and  ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید