according to the iranian code of practice for seismic resistant design of buildings, soft storey phenomenon happens in a storey when the lateral stiffness of the storey is lower than 70% of the stiffness of the upper storey, or if it is lower than 80% of the average stiffness of the three upper stories. in the combined structural systems containing moment frames and shear walls, it is possible ...

The flow transport of a 420 ˆ 320 ˆ 90 mm beam blank continuous casting mold that used open-stream pouring combined with submerged refractory funnels was studied. By considering the dynamic similarity, geometric similarity, and air entrapment quantity similarity, a full-size water model was established. Meanwhile, the 3D mathematical models that included three phases were applied. Through the c...

The proposed light-frame structure comprises steel columns for vertical loads and an innovative bracing system to efficiently resist seismic actions. This seismic force resisting system consists of a light timber frame braced with an Oriented Strand Board (OSB) sheet and an external technoprene plaster-infilled slab. Steel brackets are used as foundation and floor connections. Experimental cycl...

Results of an experimental investigation on the behavior and ultimate shear capacity of 27 reinforced concrete Transfer (deep) beams are summarized. The main variables were percent longitudinal (tension) steel (0.28 to 0.60%), percent horizontal web steel (0.60 to 2.40%), percent vertical steel (0.50 to 2.25%), percent orthogonal web steel, shear span-to-depth ratio (1.10 to 3.20) and cube conc...

BACKGROUND A biomechanical study of three sternotomy closure techniques (figure-of-eight stainless-steel wires, Pectofix Dynamic Sternal Fixation [DSF] stainless-steel plates, and figure-of-eight stainless-steel cables) was conducted to compare strength and stiffness variables in three clinically relevant loading modes (anterior-posterior shear, longitudinal shear, and lateral distraction). M...

Shear walls are important vertical and lateral bearing element in structures. While shear with openings fragile due to stress concentration the quasi-brittle behavior of concrete tension. Therefore, additional strengthening rebars required for openings. However, it aggravates problem dense reinforcement which increases steel cage manufacturing compaction still lacks countermeasures against dama...

composite couple beams are the concrete elements consisting of longitudinal bars and steel plate, therefore suitable for shear transferring in couple shear walls with arranged gates in its height. in this paper, after modeling couple beams with and without steel plates with f.e methods and calibration the models with experimental results, effects of parameters such as thickness, height, length ...

Steel plate shear walls (SPSW) have been used as the primary lateral force resisting system in buildings. Extensive analytical studies on steel plate shear walls in the United States, Canada, Taiwan and other countries have already validated the simple analytical model known as strip model to predict the monotonic behavior of this kind of structural system. However, more research is still neede...