According to the different construction forms of PBL shear connectors in steel-concrete composite beam and steel-concrete joint section, eight finite element models in two groups of the two construction forms are conducted to study different mechanical properties of PBL shear connectors. Following conclusions can be drawn from the finite element method calculation results. The load-slip curve, ...

Historic constructions are common in Europe, but natural hazards can produce significant damage. Shear reinforcement of historic walls, especially seismic areas, is often necessary and new retrofitting methods have recently been proposed to restore or increase the lateral capacity shear walls. In this paper combined use cross-laminated timber panels steel wire ropes reinforce rubble stone mason...

This paper presents an ongoing research project on the behavior and design of “hybrid” precast concrete wall structures for use in seismic regions. Hybrid precast walls utilize a combination of mild (e.g., Grade 60) steel and high-strength unbonded post-tensioning (PT) steel for flexural resistance across horizontal joints. The mild steel reinforcement is designed to yield in tension and compre...

Cold-formed steel (CFS) shear walls with concrete-filled rectangular steel tube (CFRST) columns as end studs can upgrade the performance of mid-rise CFS structures, such as the vertical bearing capacity, anti-overturning ability, shear strength, and fire resistance properties, thereby enhancing the safety of structures. A theoretical hysteretic model is established according to a previous exper...

The cold-formed steel-framed shear wall sheathed with steel sheet is widely used as a lateral force-resisting system for light-framed construction. However, the boundary conditions of screw joint are not clear when screwed to frame. To address this issue, experimental methods have been calculate strength, but these many limiting factors. In study, we investigate structural performance integrate...

A new technique for the strengthening of existing R/C shear walls based on the application of very thin high performance jackets is presented in this paper. The strengthening jacket is made of high performance concrete and high strength steel mesh. The experimental study on a 1:3 scale R/C wall, proportioned to resist the vertical loads only, and reinforced by means of a 15 mm thick high perfor...

Shear walls are used in most of the tall buildings for carrying the lateral load. When openings for doors or windows are necessary to be existed in the shear walls, a special type of the shear walls is used called "coupled shear walls" which in some cases is stiffened by specific beams and so, called "stiffened coupled shear walls". In this paper, a mathematical method for geometrically nonline...

Rebar fracture in boundary elements of lightly reinforced shear walls in recent earthquake motivated research on the minimum longitudinal reinforcement applicable to shear walls. These researches lead to change in the ACI 318-19 requirement for minimum longitudinal reinforcement in boundary elements. New ACI 318 requirement increase minimum longitudinal reinforcement ratio for boundary elements...