نتایج جستجو برای: the flow dynamic behavior

تعداد نتایج: 16301274  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی اصفهان - دانشکده ریاضی 1390

به طور کلی در فرآیندهای مارکوف ارگودیک دو بعدی یافتن فرم بسته توزیع ایستا، تنها برای حالات خیلی خاص امکان پذیر است. با توجه به این مشکل و نیز با توجه به اهمیت توزیع ایستا، بررسی و مطالعه رفتار مجانبی توزیع ایستای این فرآیندها مورد توجه قرار گرفته است. زنجیر قدم زدن تصادفی دو بعدی که در برخی متون به آن، فرآیند qbd دو طرفه نیز می گویند، یکی از این فرآیندها است. یک فرآیند qbd زمان گسسته یک زنجیر م...

Journal: :international journal of iron & steel society of iran 2005
a. ekrami m. bahrehbarpoor

dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500c. stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500c, and smooth flow at the other temperatures. both yield and ultimate tensile strengths increased with increasing testing temperature up to about 4500c and then decreased at h...

E. Barghi, M.R. Ghasemi,

In this paper the performance of Artificial Neural Networks (ANNs) and Adaptive Neuro- Fuzzy Inference Systems (ANFIS) in simulating the inverse dynamic behavior of Magneto- Rheological (MR) dampers is investigated. MR dampers are one of the most applicable methods in semi active control of seismic response of structures. Various mathematical models are introduced to simulate the dynamic behavi...

پایان نامه :وزارت علوم، تحقیقات و فناوری - پژوهشگاه پلیمر و پتروشیمی ایران - پژوهشکده پتروشیمی 1389

this is an original study on the effect of a polyisobutylene – polydimethylsiloxane (pibpdms) block copolymer modifier used as an interfacial active agent on the dynamics behaviour of single newtonian drops suspended in a polyisobutylene (pib) newtonian matrix. the results were divided in two sections. the first part included the experiments carried out on the non-modified and 2% block cop...

Journal: :مدیریت صنعتی 0
غلامرضا اسماعیلیان استادیار گروه مهندسی صنایع دانشگاه پیام نور تهران، تهران، ایران فروزان لورک زاده دانشجوی کارشناسی ارشد، مهندسی صنایع، گروه مهندسی صنایع، دانشگاه پیام نور مرکز شهرری رحمان زارعیان دانشجوی کارشناسی ارشد مهندسی سیستم های اقتصادی- اجتماعی، دانشکدۀ مهندسی صنایع و سیستم ها، دانشگاه تهران، تهران، ایران

maintenance is one of the inseparable parts of each industry and relations between this part and others consist of many dynamics and feedbacks. by this regard systems dynamic is a tool that can be used to analyze this part. in this paper for a company that produces wire and cable, cause and effect (feedbacks) between maintenance and others part are modeled. after creating stock-flow diagram, mo...

Journal: :اکو هیدرولوژی 0
مهری کاکی کارشناس ارشد مهندسی منابع آب، دانشگاه تبریز فرخ اسدزاده استادیار گروه علوم خاک، دانشکدۀ کشاورزی، دانشگاه ارومیه احمد فاخری فرد استاد گروه مهندسی آب، دانشکدۀ کشاورزی، دانشگاه تبریز

dam reservoirs supplies water resources for drinking, agriculture, and industry almost in all parts of iran. lack of proper utilization rules and unbalanced demands versus available water has led to many problems regarding to ineffective use of the water resources. precipitation and flow rate are stochastic phenomena. therefore, multi-step processes related to the water use efficiency should be...

In this research, modeling, simulation, and control of a methanol-to-olefins laboratory fixed-bed reactor with electrical resistance furnace have been investigated in both steady-state and dynamic conditions. The reactor was modeled as a one-dimensional pseudo-homogeneous system. Then, the reactor was simulated at steady-state conditions and the effect of different parameters including...

Journal: :journal of industrial engineering, international 2011
m.j tarokh n dabiri a shokouhi h shafiei

totoday’s market place is increasingly dynamic and volatile. in this area supply network issues recently have attracted a lot of attention from industrial practitioners and academics worldwide. chaos theory is the study of complex, nonlinear, dynamic systems. for chaotic systems, a tiny change in conditions may result in an enormous change in system output, whereas substantial changes in condit...

Journal: :journal of applied and computational mechanics 0
vincent olunloyo department of systems engineering, faculty of engineering, university of lagos charles osheku centre for space transport and propulsion, national space research and development agency patrick olayiwola department of mechanical & biomedical engineering, college of engineering, bells university of technology

in this paper, we present an analytical method for solving a well-posed boundary value problem of mathematical physics governing the vibration characteristics of an internal flow propelled fluid-structure interaction where the pipeline segment is idealized as an elastic hollow beam conveying an incompressible fluid on a viscoelastic foundation. the effect of coriolis and damping forces on the o...

Atapour, M., Sadeghian, B., Taherizadeh , A.,

Today, steel to aluminum joints are used to facilitate transportation and fuel consumption. These joints are applied from nuclear, aerospace and naval to automobile and kitchen industries. According to previous studies fusion welding processes are not suitable methods for these joints, solid-state welding, especially friction stir welding, is a proper way to use for these joints. However, using...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید